Filtered by vendor Linksys Subscriptions
Total 210 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2006-2559 1 Linksys 2 Wrt54g, Wrt54g V5 2025-04-03 N/A
Linksys WRT54G Wireless-G Broadband Router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a modified InternalClient parameter, which is not validated, as demonstrated by using AddPortMapping to forward arbitrary traffic.
CVE-2005-1059 1 Linksys 1 Wet11 2025-04-03 N/A
Linksys WET11 1.5.4 allows remote attackers to change the password without providing the original password via the data parameter to changepw.html.
CVE-2005-4257 1 Linksys 4 Befw11s4, Befw11s4 V3, Befw11s4 V4 and 1 more 2025-04-03 N/A
Linksys WRT54GS and BEFW11S4 allows remote attackers to cause a denial of service (device crash) via an IP packet with the same source and destination IPs and ports, and with the SYN flag set (aka LAND). NOTE: the provenance of this issue is unknown; the details are obtained solely from the BID.
CVE-2002-1236 1 Linksys 1 Befsr41 2025-04-03 N/A
The remote management web server for Linksys BEFSR41 EtherFast Cable/DSL Router before firmware 1.42.7 allows remote attackers to cause a denial of service (crash) via an HTTP request to Gozila.cgi without any arguments.
CVE-2001-0514 3 Atmel, Linksys, Netgear 3 802.11b Vnet-b Access Point, Wap11, Me102 2025-04-03 N/A
SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network.
CVE-2005-2916 1 Linksys 1 Wrt54g 2025-04-03 N/A
Linksys WRT54G 3.01.03, 3.03.6, 4.00.7, and possibly other versions before 4.20.7, does not verify user authentication until after an HTTP POST request has been processed, which allows remote attackers to (1) modify configuration using restore.cgi or (2) upload new firmware using upgrade.cgi.
CVE-2005-2915 1 Linksys 1 Wrt54g 2025-04-03 N/A
ezconfig.asp in Linksys WRT54G router 3.01.03, 3.03.6, non-default configurations of 2.04.4, and possibly other versions, uses weak encryption (XOR encoding with a fixed byte mask) for configuration information, which could allow attackers to decrypt the information and possibly re-encrypt it in conjunction with CVE-2005-2914.
CVE-2005-2912 1 Linksys 1 Wrt54g 2025-04-03 N/A
Linksys WRT54G router allows remote attackers to cause a denial of service (CPU consumption and server hang) via an HTTP POST request with a negative Content-Length value.
CVE-2004-2507 1 Linksys 1 Wvc11b 2025-04-03 N/A
Absolute path traversal vulnerability in main.cgi in Linksys WVC11B Wireless-B Internet Video Camera allows remote attackers to read arbitrary files via an absolute pathname in the next_file parameter.
CVE-2004-0580 1 Linksys 12 Befcmu10, Befn2ps4, Befsr11 and 9 more 2025-04-03 N/A
DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information.
CVE-2003-1497 1 Linksys 1 Befsx41 2025-04-03 N/A
Buffer overflow in the system log viewer of Linksys BEFSX41 1.44.3 allows remote attackers to cause a denial of service via an HTTP request with a long Log_Page_Num variable.
CVE-2002-2371 1 Linksys 1 Wet11 2025-04-03 N/A
Linksys WET11 firmware 1.31 and 1.32 allows remote attackers to cause a denial of service (crash) via a packet containing the device's hardware address as the source MAC address in the DLC header.
CVE-2002-2159 1 Linksys 3 Befsr11, Befsr41, Befsru31 2025-04-03 N/A
Linksys EtherFast Cable/DSL BEFSR11, BEFSR41 and BEFSRU31 with the firmware 1.42.7 upgrade installed opens TCP port 5678 for remote administration even when the "Block WAN" and "Remote Admin" options are disabled, which allows remote attackers to gain access.
CVE-2001-0888 3 Atmel, Linksys, Netgear 3 Firmware, Wap11, Me102 2025-04-03 N/A
Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests.
CVE-2002-1312 1 Linksys 9 Befn2ps4, Befsr11, Befsr41 and 6 more 2025-04-03 N/A
Buffer overflow in the Web management interface in Linksys BEFW11S4 wireless access point router 2 and BEFSR11, BEFSR41, and BEFSRU31 EtherFast Cable/DSL routers with firmware before 1.43.3 with remote management enabled allows remote attackers to cause a denial of service (router crash) via a long password.
CVE-2002-1865 2 D-link, Linksys 4 Di-804, Dl-704, Befw11s4 and 1 more 2025-04-03 N/A
Buffer overflow in the Embedded HTTP server, as used in (1) D-Link DI-804 4.68, Dl-704 V2.56b6, and Dl-704 V2.56b5 and (2) Linksys Etherfast BEFW11S4 Wireless AP + Cable/DSL Router 1.37.2 through 1.42.7 and Linksys WAP11 1.3 and 1.4, allows remote attackers to cause a denial of service (crash) via a long header, as demonstrated using the Host header.
CVE-2002-0426 1 Linksys 1 Befvp41 2025-04-03 N/A
VPN Server module in Linksys EtherFast BEFVP41 Cable/DSL VPN Router before 1.40.1 reduces the key lengths for keys that are supplied via manual key entry, which makes it easier for attackers to crack the keys.
CVE-2025-29226 1 Linksys 2 E5600, E5600 Firmware 2025-04-01 6.3 Medium
In Linksys E5600 V1.1.0.26, the \usr\share\lua\runtime.lua file contains a command injection vulnerability in the runtime.pingTest function via the pt["count"] parameter.
CVE-2025-29227 1 Linksys 2 E5600, E5600 Firmware 2025-04-01 6.3 Medium
In Linksys E5600 V1.1.0.26, the \usr\share\lua\runtime.lua file contains a command injection vulnerability in the runtime.pingTest function via the pt["pkgsize"] parameter.
CVE-2025-29230 1 Linksys 2 E5600, E5600 Firmware 2025-04-01 8.6 High
Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.emailReg function. The vulnerability can be triggered via the `pt["email"]` parameter.