Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38467 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling If there's support for another console device (such as a TTY serial), the kernel occasionally panics during boot. The panic message and a relevant snippet of the call stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000 Call trace: drm_crtc_handle_vblank+0x10/0x30 (P) decon_irq_handler+0x88/0xb4 [...] Otherwise, the panics don't happen. This indicates that it's some sort of race condition. Add a check to validate if the drm device can handle vblanks before calling drm_crtc_handle_vblank() to avoid this. | ||||
| CVE-2025-38439 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] | ||||
| CVE-2025-38445 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix stack memory use after return in raid1_reshape In the raid1_reshape function, newpool is allocated on the stack and assigned to conf->r1bio_pool. This results in conf->r1bio_pool.wait.head pointing to a stack address. Accessing this address later can lead to a kernel panic. Example access path: raid1_reshape() { // newpool is on the stack mempool_t newpool, oldpool; // initialize newpool.wait.head to stack address mempool_init(&newpool, ...); conf->r1bio_pool = newpool; } raid1_read_request() or raid1_write_request() { alloc_r1bio() { mempool_alloc() { // if pool->alloc fails remove_element() { --pool->curr_nr; } } } } mempool_free() { if (pool->curr_nr < pool->min_nr) { // pool->wait.head is a stack address // wake_up() will try to access this invalid address // which leads to a kernel panic return; wake_up(&pool->wait); } } Fix: reinit conf->r1bio_pool.wait after assigning newpool. | ||||
| CVE-2025-38466 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Revert to requiring CAP_SYS_ADMIN for uprobes Jann reports that uprobes can be used destructively when used in the middle of an instruction. The kernel only verifies there is a valid instruction at the requested offset, but due to variable instruction length cannot determine if this is an instruction as seen by the intended execution stream. Additionally, Mark Rutland notes that on architectures that mix data in the text segment (like arm64), a similar things can be done if the data word is 'mistaken' for an instruction. As such, require CAP_SYS_ADMIN for uprobes. | ||||
| CVE-2025-38456 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Fix potential memory corruption in ipmi_create_user() The "intf" list iterator is an invalid pointer if the correct "intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on and invalid pointer will lead to memory corruption. We don't really need to call atomic_dec() if we haven't called atomic_add_return() so update the if (intf->in_shutdown) path as well. | ||||
| CVE-2025-38446 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70 | ||||
| CVE-2025-38452 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe() Add check for the return value of rcar_gen4_ptp_alloc() to prevent potential null pointer dereference. | ||||
| CVE-2025-38447 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios. | ||||
| CVE-2025-38451 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix GPF in bitmap_get_stats() The commit message of commit 6ec1f0239485 ("md/md-bitmap: fix stats collection for external bitmaps") states: Remove the external bitmap check as the statistics should be available regardless of bitmap storage location. Return -EINVAL only for invalid bitmap with no storage (neither in superblock nor in external file). But, the code does not adhere to the above, as it does only check for a valid super-block for "internal" bitmaps. Hence, we observe: Oops: GPF, probably for non-canonical address 0x1cd66f1f40000028 RIP: 0010:bitmap_get_stats+0x45/0xd0 Call Trace: seq_read_iter+0x2b9/0x46a seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6d/0xf0 do_syscall_64+0x8c/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e We fix this by checking the existence of a super-block for both the internal and external case. | ||||
| CVE-2025-38465 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576 | ||||
| CVE-2025-38460 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix potential null-ptr-deref in to_atmarpd(). atmarpd is protected by RTNL since commit f3a0592b37b8 ("[ATM]: clip causes unregister hang"). However, it is not enough because to_atmarpd() is called without RTNL, especially clip_neigh_solicit() / neigh_ops->solicit() is unsleepable. Also, there is no RTNL dependency around atmarpd. Let's use a private mutex and RCU to protect access to atmarpd in to_atmarpd(). | ||||
| CVE-2025-38459 | 1 Linux | 1 Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: | ||||
| CVE-2025-38457 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Abort __tc_modify_qdisc if parent class does not exist Lion's patch [1] revealed an ancient bug in the qdisc API. Whenever a user creates/modifies a qdisc specifying as a parent another qdisc, the qdisc API will, during grafting, detect that the user is not trying to attach to a class and reject. However grafting is performed after qdisc_create (and thus the qdiscs' init callback) is executed. In qdiscs that eventually call qdisc_tree_reduce_backlog during init or change (such as fq, hhf, choke, etc), an issue arises. For example, executing the following commands: sudo tc qdisc add dev lo root handle a: htb default 2 sudo tc qdisc add dev lo parent a: handle beef fq Qdiscs such as fq, hhf, choke, etc unconditionally invoke qdisc_tree_reduce_backlog() in their control path init() or change() which then causes a failure to find the child class; however, that does not stop the unconditional invocation of the assumed child qdisc's qlen_notify with a null class. All these qdiscs make the assumption that class is non-null. The solution is ensure that qdisc_leaf() which looks up the parent class, and is invoked prior to qdisc_create(), should return failure on not finding the class. In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the parentid doesn't correspond to a class, so that we can detect it earlier on and abort before qdisc_create is called. [1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ | ||||
| CVE-2025-38443 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_genl_connect() error path There is a use-after-free issue in nbd: block nbd6: Receive control failed (result -104) block nbd6: shutting down sockets ================================================================== BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022 Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67 CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: nbd6-recv recv_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline] recv_work+0x694/0xa80 drivers/block/nbd.c:1022 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> nbd_genl_connect() does not properly stop the device on certain error paths after nbd_start_device() has been called. This causes the error path to put nbd->config while recv_work continue to use the config after putting it, leading to use-after-free in recv_work. This patch moves nbd_start_device() after the backend file creation. | ||||
| CVE-2025-38438 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2025-38489 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has accidentally removed the critical piece of commit c730fce7c70c ("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing intermittent kernel panics in e.g. perf's on_switch() prog to reappear. Restore the fix and add a comment. | ||||
| CVE-2025-38485 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c | ||||
| CVE-2025-38469 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host for more than one event channel potr (nr_ports > 1). After the kmalloc_array(), the error paths need to go through the "out" label, but the call to kvm_read_guest_virt() does not. [Adjusted commit message. - Paolo] | ||||
| CVE-2025-38484 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: backend: fix out-of-bound write The buffer is set to 80 character. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". But afterwards a string terminator is written to the buffer at offset count without boundary check. The zero termination is written OUT-OF-BOUND. Add a check that the given buffer is smaller then the buffer to prevent. | ||||
| CVE-2025-38475 | 1 Linux | 1 Linux Kernel | 2025-07-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smc: Fix various oops due to inet_sock type confusion. syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435efcbf3 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [ ---truncated--- | ||||