Total
347 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52839 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast. | ||||
| CVE-2022-48798 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: verify the driver availability for path_event call If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. | ||||
| CVE-2024-57902 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_tci() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 | ||||
| CVE-2024-53176 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: During unmount, ensure all cached dir instances drop their dentry The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can race with various cached directory operations, which ultimately results in dentries not being dropped and these kernel BUGs: BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) ------------[ cut here ]------------ kernel BUG at fs/super.c:661! This happens when a cfid is in the process of being cleaned up when, and has been removed from the cfids->entries list, including: - Receiving a lease break from the server - Server reconnection triggers invalidate_all_cached_dirs(), which removes all the cfids from the list - The laundromat thread decides to expire an old cfid. To solve these problems, dropping the dentry is done in queued work done in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs() flushes that workqueue after it drops all the dentries of which it's aware. This is a global workqueue (rather than scoped to a mount), but the queued work is minimal. The final cleanup work for cleaning up a cfid is performed via work queued in the serverclose_wq workqueue; this is done separate from dropping the dentries so that close_all_cached_dirs() doesn't block on any server operations. Both of these queued works expect to invoked with a cfid reference and a tcon reference to avoid those objects from being freed while the work is ongoing. While we're here, add proper locking to close_all_cached_dirs(), and locking around the freeing of cfid->dentry. | ||||
| CVE-2023-52787 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge | ||||
| CVE-2024-57901 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900038d7638 EFLAGS: 00010282 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60 R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140 R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011 FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585 packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1055 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2940 __sys_recvmmsg net/socket.c:3014 [inline] __do_sys_recvmmsg net/socket.c:3037 [inline] __se_sys_recvmmsg net/socket.c:3030 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-40949 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: shmem: fix getting incorrect lruvec when replacing a shmem folio When testing shmem swapin, I encountered the warning below on my machine. The reason is that replacing an old shmem folio with a new one causes mem_cgroup_migrate() to clear the old folio's memcg data. As a result, the old folio cannot get the correct memcg's lruvec needed to remove itself from the LRU list when it is being freed. This could lead to possible serious problems, such as LRU list crashes due to holding the wrong LRU lock, and incorrect LRU statistics. To fix this issue, we can fallback to use the mem_cgroup_replace_folio() to replace the old shmem folio. [ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960 [ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff) [ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000 [ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled()) [ 5241.100338] ------------[ cut here ]------------ [ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150 [...] [ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150 [ 5241.100376] sp : ffff80008b38b930 [...] [ 5241.100398] Call trace: [ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100401] __page_cache_release+0x90/0x300 [ 5241.100404] __folio_put+0x50/0x108 [ 5241.100406] shmem_replace_folio+0x1b4/0x240 [ 5241.100409] shmem_swapin_folio+0x314/0x528 [ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930 [ 5241.100412] shmem_fault+0x74/0x160 [ 5241.100414] __do_fault+0x40/0x218 [ 5241.100417] do_shared_fault+0x34/0x1b0 [ 5241.100419] do_fault+0x40/0x168 [ 5241.100420] handle_pte_fault+0x80/0x228 [ 5241.100422] __handle_mm_fault+0x1c4/0x440 [ 5241.100424] handle_mm_fault+0x60/0x1f0 [ 5241.100426] do_page_fault+0x120/0x488 [ 5241.100429] do_translation_fault+0x4c/0x68 [ 5241.100431] do_mem_abort+0x48/0xa0 [ 5241.100434] el0_da+0x38/0xc0 [ 5241.100436] el0t_64_sync_handler+0x68/0xc0 [ 5241.100437] el0t_64_sync+0x14c/0x150 [ 5241.100439] ---[ end trace 0000000000000000 ]--- [baolin.wang@linux.alibaba.com: remove less helpful comments, per Matthew] | ||||
| CVE-2022-49052 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix unexpected zeroed page mapping with zram swap Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly. | ||||
| CVE-2022-48812 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | ||||
| CVE-2022-49171 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't BUG if someone dirty pages without asking ext4 first [un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2]. This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost). So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2]. [1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz [2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com | ||||
| CVE-2022-49402 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore. | ||||
| CVE-2024-56589 | 1 Linux | 1 Linux | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add cond_resched() for no forced preemption model For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread. | ||||
| CVE-2025-2410 | 1 Abb | 3 Aspect Enterprise, Matrix Series, Nexus Series | 2025-07-12 | 9.1 Critical |
| Port manipulation vulnerabilities in ASPECT provide attackers with the ability to con-trol TCP/IP port access if session administrator credentials become compromised. This issue affects ASPECT-Enterprise: through 3.08.03; NEXUS Series: through 3.08.03; MATRIX Series: through 3.08.03. | ||||
| CVE-2024-47726 | 1 Linux | 1 Linux Kernel | 2025-07-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait dio completion It should wait all existing dio write IOs before block removal, otherwise, previous direct write IO may overwrite data in the block which may be reused by other inode. | ||||
| CVE-2024-44942 | 1 Linux | 1 Linux Kernel | 2025-07-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing. | ||||
| CVE-2023-52625 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-07-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Refactor DMCUB enter/exit idle interface [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] We need to exit out of the idle state prior to sending a command, but the process that performs the exit also invokes a command itself. Fixing this issue involves the following: 1. Using a software state to track whether or not we need to start the process to exit idle or notify idle. It's possible for the hardware to have exited an idle state without driver knowledge, but entering one is always restricted to a driver allow - which makes the SW state vs HW state mismatch issue purely one of optimization, which should seldomly be hit, if at all. 2. Refactor any instances of exit/notify idle to use a single wrapper that maintains this SW state. This works simialr to dc_allow_idle_optimizations, but works at the DMCUB level and makes sure the state is marked prior to any notify/exit idle so we don't enter an infinite loop. 3. Make sure we exit out of idle prior to sending any commands or waiting for DMCUB idle. This patch takes care of 1/2. A future patch will take care of wrapping DMCUB command submission with calls to this new interface. | ||||
| CVE-2023-52624 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-07-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before executing GPINT commands [Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. | ||||
| CVE-2024-26726 | 1 Linux | 1 Linux Kernel | 2025-07-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't drop extent_map for free space inode on write error While running the CI for an unrelated change I hit the following panic with generic/648 on btrfs_holes_spacecache. assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1385! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1 RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0 Call Trace: <TASK> extent_write_cache_pages+0x2ac/0x8f0 extent_writepages+0x87/0x110 do_writepages+0xd5/0x1f0 filemap_fdatawrite_wbc+0x63/0x90 __filemap_fdatawrite_range+0x5c/0x80 btrfs_fdatawrite_range+0x1f/0x50 btrfs_write_out_cache+0x507/0x560 btrfs_write_dirty_block_groups+0x32a/0x420 commit_cowonly_roots+0x21b/0x290 btrfs_commit_transaction+0x813/0x1360 btrfs_sync_file+0x51a/0x640 __x64_sys_fdatasync+0x52/0x90 do_syscall_64+0x9c/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 This happens because we fail to write out the free space cache in one instance, come back around and attempt to write it again. However on the second pass through we go to call btrfs_get_extent() on the inode to get the extent mapping. Because this is a new block group, and with the free space inode we always search the commit root to avoid deadlocking with the tree, we find nothing and return a EXTENT_MAP_HOLE for the requested range. This happens because the first time we try to write the space cache out we hit an error, and on an error we drop the extent mapping. This is normal for normal files, but the free space cache inode is special. We always expect the extent map to be correct. Thus the second time through we end up with a bogus extent map. Since we're deprecating this feature, the most straightforward way to fix this is to simply skip dropping the extent map range for this failed range. I shortened the test by using error injection to stress the area to make it easier to reproduce. With this patch in place we no longer panic with my error injection test. | ||||
| CVE-2024-36357 | 2025-07-10 | 5.6 Medium | ||
| A transient execution vulnerability in some AMD processors may allow an attacker to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries. | ||||
| CVE-2024-36350 | 2025-07-10 | 5.6 Medium | ||
| A transient execution vulnerability in some AMD processors may allow an attacker to infer data from previous stores, potentially resulting in the leakage of privileged information. | ||||