Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38716 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix general protection fault in hfs_find_init() The hfs_find_init() method can trigger the crash if tree pointer is NULL: [ 45.746290][ T9787] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KAI [ 45.747287][ T9787] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] [ 45.748716][ T9787] CPU: 2 UID: 0 PID: 9787 Comm: repro Not tainted 6.16.0-rc3 #10 PREEMPT(full) [ 45.750250][ T9787] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 45.751983][ T9787] RIP: 0010:hfs_find_init+0x86/0x230 [ 45.752834][ T9787] Code: c1 ea 03 80 3c 02 00 0f 85 9a 01 00 00 4c 8d 6b 40 48 c7 45 18 00 00 00 00 48 b8 00 00 00 00 00 fc [ 45.755574][ T9787] RSP: 0018:ffffc90015157668 EFLAGS: 00010202 [ 45.756432][ T9787] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff819a4d09 [ 45.757457][ T9787] RDX: 0000000000000008 RSI: ffffffff819acd3a RDI: ffffc900151576e8 [ 45.758282][ T9787] RBP: ffffc900151576d0 R08: 0000000000000005 R09: 0000000000000000 [ 45.758943][ T9787] R10: 0000000080000000 R11: 0000000000000001 R12: 0000000000000004 [ 45.759619][ T9787] R13: 0000000000000040 R14: ffff88802c50814a R15: 0000000000000000 [ 45.760293][ T9787] FS: 00007ffb72734540(0000) GS:ffff8880cec64000(0000) knlGS:0000000000000000 [ 45.761050][ T9787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.761606][ T9787] CR2: 00007f9bd8225000 CR3: 000000010979a000 CR4: 00000000000006f0 [ 45.762286][ T9787] Call Trace: [ 45.762570][ T9787] <TASK> [ 45.762824][ T9787] hfs_ext_read_extent+0x190/0x9d0 [ 45.763269][ T9787] ? submit_bio_noacct_nocheck+0x2dd/0xce0 [ 45.763766][ T9787] ? __pfx_hfs_ext_read_extent+0x10/0x10 [ 45.764250][ T9787] hfs_get_block+0x55f/0x830 [ 45.764646][ T9787] block_read_full_folio+0x36d/0x850 [ 45.765105][ T9787] ? __pfx_hfs_get_block+0x10/0x10 [ 45.765541][ T9787] ? const_folio_flags+0x5b/0x100 [ 45.765972][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.766415][ T9787] filemap_read_folio+0xbe/0x290 [ 45.766840][ T9787] ? __pfx_filemap_read_folio+0x10/0x10 [ 45.767325][ T9787] ? __filemap_get_folio+0x32b/0xbf0 [ 45.767780][ T9787] do_read_cache_folio+0x263/0x5c0 [ 45.768223][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.768666][ T9787] read_cache_page+0x5b/0x160 [ 45.769070][ T9787] hfs_btree_open+0x491/0x1740 [ 45.769481][ T9787] hfs_mdb_get+0x15e2/0x1fb0 [ 45.769877][ T9787] ? __pfx_hfs_mdb_get+0x10/0x10 [ 45.770316][ T9787] ? find_held_lock+0x2b/0x80 [ 45.770731][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771200][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771674][ T9787] hfs_fill_super+0x38e/0x720 [ 45.772092][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.772549][ T9787] ? snprintf+0xbe/0x100 [ 45.772931][ T9787] ? __pfx_snprintf+0x10/0x10 [ 45.773350][ T9787] ? do_raw_spin_lock+0x129/0x2b0 [ 45.773796][ T9787] ? find_held_lock+0x2b/0x80 [ 45.774215][ T9787] ? set_blocksize+0x40a/0x510 [ 45.774636][ T9787] ? sb_set_blocksize+0x176/0x1d0 [ 45.775087][ T9787] ? setup_bdev_super+0x369/0x730 [ 45.775533][ T9787] get_tree_bdev_flags+0x384/0x620 [ 45.775985][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.776453][ T9787] ? __pfx_get_tree_bdev_flags+0x10/0x10 [ 45.776950][ T9787] ? bpf_lsm_capable+0x9/0x10 [ 45.777365][ T9787] ? security_capable+0x80/0x260 [ 45.777803][ T9787] vfs_get_tree+0x8e/0x340 [ 45.778203][ T9787] path_mount+0x13de/0x2010 [ 45.778604][ T9787] ? kmem_cache_free+0x2b0/0x4c0 [ 45.779052][ T9787] ? __pfx_path_mount+0x10/0x10 [ 45.779480][ T9787] ? getname_flags.part.0+0x1c5/0x550 [ 45.779954][ T9787] ? putname+0x154/0x1a0 [ 45.780335][ T9787] __x64_sys_mount+0x27b/0x300 [ 45.780758][ T9787] ? __pfx___x64_sys_mount+0x10/0x10 [ 45.781232][ T9787] ---truncated--- | ||||
| CVE-2025-38706 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created. | ||||
| CVE-2025-38685 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix vmalloc out-of-bounds write in fast_imageblit This issue triggers when a userspace program does an ioctl FBIOPUT_CON2FBMAP by passing console number and frame buffer number. Ideally this maps console to frame buffer and updates the screen if console is visible. As part of mapping it has to do resize of console according to frame buffer info. if this resize fails and returns from vc_do_resize() and continues further. At this point console and new frame buffer are mapped and sets display vars. Despite failure still it continue to proceed updating the screen at later stages where vc_data is related to previous frame buffer and frame buffer info and display vars are mapped to new frame buffer and eventully leading to out-of-bounds write in fast_imageblit(). This bheviour is excepted only when fg_console is equal to requested console which is a visible console and updates screen with invalid struct references in fbcon_putcs(). | ||||
| CVE-2025-38687 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: fix race between polling and detaching syzbot reports a use-after-free in comedi in the below link, which is due to comedi gladly removing the allocated async area even though poll requests are still active on the wait_queue_head inside of it. This can cause a use-after-free when the poll entries are later triggered or removed, as the memory for the wait_queue_head has been freed. We need to check there are no tasks queued on any of the subdevices' wait queues before allowing the device to be detached by the `COMEDI_DEVCONFIG` ioctl. Tasks will read-lock `dev->attach_lock` before adding themselves to the subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl handler by write-locking `dev->attach_lock` before checking that all of the subdevices are safe to be deleted. This includes testing for any sleepers on the subdevices' wait queues. It remains locked until the device has been detached. This requires the `comedi_device_detach()` function to be refactored slightly, moving the bulk of it into new function `comedi_device_detach_locked()`. Note that the refactor of `comedi_device_detach()` results in `comedi_device_cancel_all()` now being called while `dev->attach_lock` is write-locked, which wasn't the case previously, but that does not matter. Thanks to Jens Axboe for diagnosing the problem and co-developing this patch. | ||||
| CVE-2025-38708 | 1 Linux | 1 Linux Kernel | 2025-09-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drbd: add missing kref_get in handle_write_conflicts With `two-primaries` enabled, DRBD tries to detect "concurrent" writes and handle write conflicts, so that even if you write to the same sector simultaneously on both nodes, they end up with the identical data once the writes are completed. In handling "superseeded" writes, we forgot a kref_get, resulting in a premature drbd_destroy_device and use after free, and further to kernel crashes with symptoms. Relevance: No one should use DRBD as a random data generator, and apparently all users of "two-primaries" handle concurrent writes correctly on layer up. That is cluster file systems use some distributed lock manager, and live migration in virtualization environments stops writes on one node before starting writes on the other node. Which means that other than for "test cases", this code path is never taken in real life. FYI, in DRBD 9, things are handled differently nowadays. We still detect "write conflicts", but no longer try to be smart about them. We decided to disconnect hard instead: upper layers must not submit concurrent writes. If they do, that's their fault. | ||||
| CVE-2025-38712 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file() When the volume header contains erroneous values that do not reflect the actual state of the filesystem, hfsplus_fill_super() assumes that the attributes file is not yet created, which later results in hitting BUG_ON() when hfsplus_create_attributes_file() is called. Replace this BUG_ON() with -EIO error with a message to suggest running fsck tool. | ||||
| CVE-2025-38684 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: use old 'nbands' while purging unused classes Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify() after recent changes from Lion [2]. The problem is: in ets_qdisc_change() we purge unused DWRR queues; the value of 'q->nbands' is the new one, and the cleanup should be done with the old one. The problem is here since my first attempts to fix ets_qdisc_change(), but it surfaced again after the recent qdisc len accounting fixes. Fix it purging idle DWRR queues before assigning a new value of 'q->nbands', so that all purge operations find a consistent configuration: - old 'q->nbands' because it's needed by ets_class_find() - old 'q->nstrict' because it's needed by ets_class_is_strict() BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary) Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021 RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80 Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab RSP: 0018:ffffba186009f400 EFLAGS: 00010202 RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004 RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004 R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000 R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000 FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ets_class_qlen_notify+0x65/0x90 [sch_ets] qdisc_tree_reduce_backlog+0x74/0x110 ets_qdisc_change+0x630/0xa40 [sch_ets] __tc_modify_qdisc.constprop.0+0x216/0x7f0 tc_modify_qdisc+0x7c/0x120 rtnetlink_rcv_msg+0x145/0x3f0 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x245/0x390 netlink_sendmsg+0x21b/0x470 ____sys_sendmsg+0x39d/0x3d0 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x7d/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f2155114084 Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084 RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003 RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0 R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0 </TASK> [1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ | ||||
| CVE-2025-38720 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix rtnl deadlock issue Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently. | ||||
| CVE-2025-38721 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix refcount leak on table dump There is a reference count leak in ctnetlink_dump_table(): if (res < 0) { nf_conntrack_get(&ct->ct_general); // HERE cb->args[1] = (unsigned long)ct; ... While its very unlikely, its possible that ct == last. If this happens, then the refcount of ct was already incremented. This 2nd increment is never undone. This prevents the conntrack object from being released, which in turn keeps prevents cnet->count from dropping back to 0. This will then block the netns dismantle (or conntrack rmmod) as nf_conntrack_cleanup_net_list() will wait forever. This can be reproduced by running conntrack_resize.sh selftest in a loop. It takes ~20 minutes for me on a preemptible kernel on average before I see a runaway kworker spinning in nf_conntrack_cleanup_net_list. One fix would to change this to: if (res < 0) { if (ct != last) nf_conntrack_get(&ct->ct_general); But this reference counting isn't needed in the first place. We can just store a cookie value instead. A followup patch will do the same for ctnetlink_exp_dump_table, it looks to me as if this has the same problem and like ctnetlink_dump_table, we only need a 'skip hint', not the actual object so we can apply the same cookie strategy there as well. | ||||
| CVE-2025-38689 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix NULL dereference in avx512_status() Problem ------- With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status causes a warning and a NULL pointer dereference. This is because the AVX-512 timestamp code uses x86_task_fpu() but doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function for kernel threads (PF_KTHREAD specifically), making it return NULL. The point of the warning was to ensure that kernel threads only access task->fpu after going through kernel_fpu_begin()/_end(). Note: all kernel tasks exposed in /proc have a valid task->fpu. Solution -------- One option is to silence the warning and check for NULL from x86_task_fpu(). However, that warning is fairly fresh and seems like a defense against misuse of the FPU state in kernel threads. Instead, stop outputting AVX-512_elapsed_ms for kernel threads altogether. The data was garbage anyway because avx512_timestamp is only updated for user threads, not kernel threads. If anyone ever wants to track kernel thread AVX-512 use, they can come back later and do it properly, separate from this bug fix. [ dhansen: mostly rewrite changelog ] | ||||
| CVE-2025-38694 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb() In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add check on msg[0].len to prevent crash. Similar issue occurs when access msg[1].buf[0] and msg[1].buf[1]. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2025-38700 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70 | ||||
| CVE-2025-38705 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix null pointer access Writing a string without delimiters (' ', '\n', '\0') to the under gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile will result in a null pointer dereference. | ||||
| CVE-2025-38709 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: loop: Avoid updating block size under exclusive owner Syzbot came up with a reproducer where a loop device block size is changed underneath a mounted filesystem. This causes a mismatch between the block device block size and the block size stored in the superblock causing confusion in various places such as fs/buffer.c. The particular issue triggered by syzbot was a warning in __getblk_slow() due to requested buffer size not matching block device block size. Fix the problem by getting exclusive hold of the loop device to change its block size. This fails if somebody (such as filesystem) has already an exclusive ownership of the block device and thus prevents modifying the loop device under some exclusive owner which doesn't expect it. | ||||
| CVE-2025-38717 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: kcm: Fix race condition in kcm_unattach() syzbot found a race condition when kcm_unattach(psock) and kcm_release(kcm) are executed at the same time. kcm_unattach() is missing a check of the flag kcm->tx_stopped before calling queue_work(). If the kcm has a reserved psock, kcm_unattach() might get executed between cancel_work_sync() and unreserve_psock() in kcm_release(), requeuing kcm->tx_work right before kcm gets freed in kcm_done(). Remove kcm->tx_stopped and replace it by the less error-prone disable_work_sync(). | ||||
| CVE-2025-38719 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix the division by zero issue When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0. | ||||
| CVE-2025-38722 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: habanalabs: fix UAF in export_dmabuf() As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). habanalabs export_dmabuf() calls it and then proceeds to access the objects destroyed on close. In particular, it grabs an extra reference to another struct file that will be dropped as part of ->release() for ours; that "will be" is actually "might have already been". Fix that by reserving descriptor before anything else and do fd_install() only when everything had been set up. As a side benefit, we no longer have the failure exit with file already created, but reference to underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet; unlike dma_buf_fd(), fd_install() can't fail. | ||||
| CVE-2025-38723 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix jump offset calculation in tailcall The extra pass of bpf_int_jit_compile() skips JIT context initialization which essentially skips offset calculation leaving out_offset = -1, so the jmp_offset in emit_bpf_tail_call is calculated by "#define jmp_offset (out_offset - (cur_offset))" is a negative number, which is wrong. The final generated assembly are as follow. 54: bgeu $a2, $t1, -8 # 0x0000004c 58: addi.d $a6, $s5, -1 5c: bltz $a6, -16 # 0x0000004c 60: alsl.d $t2, $a2, $a1, 0x3 64: ld.d $t2, $t2, 264 68: beq $t2, $zero, -28 # 0x0000004c Before apply this patch, the follow test case will reveal soft lock issues. cd tools/testing/selftests/bpf/ ./test_progs --allow=tailcalls/tailcall_bpf2bpf_1 dmesg: watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056] | ||||
| CVE-2025-38683 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. | ||||
| CVE-2025-38726 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect After the call to phy_disconnect() netdev->phydev is reset to NULL. So fixed_phy_unregister() would be called with a NULL pointer as argument. Therefore cache the phy_device before this call. | ||||