Total
310690 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39808 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version() in ntrig_report_version(), hdev parameter passed from hid_probe(). sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null if hdev->dev.parent->parent is null, usb_dev has invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned when usb_rcvctrlpipe() use usb_dev,it trigger page fault error for address(0xffffffffffffff58) add null check logic to ntrig_report_version() before calling hid_to_usb_dev() | ||||
| CVE-2025-39807 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add error handling for old state CRTC in atomic_disable Introduce error handling to address an issue where, after a hotplug event, the cursor continues to update. This situation can lead to a kernel panic due to accessing the NULL `old_state->crtc`. E,g. Unable to handle kernel NULL pointer dereference at virtual address Call trace: mtk_crtc_plane_disable+0x24/0x140 mtk_plane_atomic_update+0x8c/0xa8 drm_atomic_helper_commit_planes+0x114/0x2c8 drm_atomic_helper_commit_tail_rpm+0x4c/0x158 commit_tail+0xa0/0x168 drm_atomic_helper_commit+0x110/0x120 drm_atomic_commit+0x8c/0xe0 drm_atomic_helper_update_plane+0xd4/0x128 __setplane_atomic+0xcc/0x110 drm_mode_cursor_common+0x250/0x440 drm_mode_cursor_ioctl+0x44/0x70 drm_ioctl+0x264/0x5d8 __arm64_sys_ioctl+0xd8/0x510 invoke_syscall+0x6c/0xe0 do_el0_svc+0x68/0xe8 el0_svc+0x34/0x60 el0t_64_sync_handler+0x1c/0xf8 el0t_64_sync+0x180/0x188 Adding NULL pointer checks to ensure stability by preventing operations on an invalid CRTC state. | ||||
| CVE-2025-10533 | 2 Mozilla, Redhat | 4 Firefox, Firefox Esr, Thunderbird and 1 more | 2025-09-18 | 8.8 High |
| This vulnerability affects Firefox < 143, Firefox ESR < 115.28, Firefox ESR < 140.3, Thunderbird < 143, and Thunderbird < 140.3. | ||||
| CVE-2025-10531 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-09-18 | 5.4 Medium |
| This vulnerability affects Firefox < 143 and Thunderbird < 143. | ||||
| CVE-2025-10532 | 2 Mozilla, Redhat | 4 Firefox, Firefox Esr, Thunderbird and 1 more | 2025-09-18 | 6.5 Medium |
| This vulnerability affects Firefox < 143, Firefox ESR < 140.3, Thunderbird < 143, and Thunderbird < 140.3. | ||||
| CVE-2025-10534 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-09-18 | 8.1 High |
| This vulnerability affects Firefox < 143 and Thunderbird < 143. | ||||
| CVE-2025-10535 | 1 Mozilla | 1 Firefox | 2025-09-18 | 7.5 High |
| This vulnerability affects Firefox < 143. | ||||
| CVE-2025-39806 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix slab out-of-bounds access in mt_report_fixup() A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...] | ||||
| CVE-2025-39817 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp. | ||||
| CVE-2023-53351 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Check scheduler work queue before calling timeout handling During an IGT GPU reset test we see again oops despite of commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling timeout handling). It uses ready condition whether to call drm_sched_fault which unwind the TDR leads to GPU reset. However it looks the ready condition is overloaded with other meanings, for example, for the following stack is related GPU reset : 0 gfx_v9_0_cp_gfx_start 1 gfx_v9_0_cp_gfx_resume 2 gfx_v9_0_cp_resume 3 gfx_v9_0_hw_init 4 gfx_v9_0_resume 5 amdgpu_device_ip_resume_phase2 does the following: /* start the ring */ gfx_v9_0_cp_gfx_start(adev); ring->sched.ready = true; The same approach is for other ASICs as well : gfx_v8_0_cp_gfx_resume gfx_v10_0_kiq_resume, etc... As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault and then drm_sched_fault. However now it depends on whether the interrupt service routine drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready field of the scheduler to true even for uninitialized schedulers and causes oops vs no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and NULL pointer dereference does not occur. Use the field timeout_wq to prevent oops for uninitialized schedulers. The field could be initialized by the work queue of resetting the domain. v1: Corrections to commit message (Luben) | ||||
| CVE-2025-9083 | 1 Wordpress | 1 Wordpress | 2025-09-18 | N/A |
| The Ninja Forms WordPress plugin before 3.11.1 unserializes user input via form field, which could allow Unauthenticated users to perform PHP Object Injection when a suitable gadget is present on the blog. | ||||
| CVE-2023-53365 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. | ||||
| CVE-2024-48842 | 1 Abb | 1 Flxeon | 2025-09-18 | 7 High |
| Use of Hard-coded Credentials vulnerability in ABB FLXEON.This issue affects FLXEON: through 9.3.5 and newer versions | ||||
| CVE-2025-10642 | 1 Chat Forum Project | 1 Chat Forum | 2025-09-18 | 3.5 Low |
| A vulnerability has been found in wangchenyi1996 chat_forum up to 80bdb92f5b460d36cab36e530a2c618acef5afd2. This impacts an unknown function of the file /q.php. Such manipulation of the argument path leads to cross site scripting. The attack may be launched remotely. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. | ||||
| CVE-2025-10662 | 1 Seacms | 1 Seacms | 2025-09-18 | 4.7 Medium |
| A vulnerability has been found in SeaCMS up to 13.3. The impacted element is an unknown function of the file /admin_members.php?ac=editsave. Such manipulation of the argument ID leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This affects another injection point than CVE-2025-25513. | ||||
| CVE-2025-7991 | 1 Ashlar | 1 Cobalt | 2025-09-18 | N/A |
| Ashlar-Vellum Cobalt VC6 File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of VC6 files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25945. | ||||
| CVE-2025-7992 | 1 Ashlar | 1 Cobalt | 2025-09-18 | N/A |
| Ashlar-Vellum Cobalt AR File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of AR files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25972. | ||||
| CVE-2023-53368 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix race issue between cpu buffer write and swap Warning happened in rb_end_commit() at code: if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))) WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142 rb_commit+0x402/0x4a0 Call Trace: ring_buffer_unlock_commit+0x42/0x250 trace_buffer_unlock_commit_regs+0x3b/0x250 trace_event_buffer_commit+0xe5/0x440 trace_event_buffer_reserve+0x11c/0x150 trace_event_raw_event_sched_switch+0x23c/0x2c0 __traceiter_sched_switch+0x59/0x80 __schedule+0x72b/0x1580 schedule+0x92/0x120 worker_thread+0xa0/0x6f0 It is because the race between writing event into cpu buffer and swapping cpu buffer through file per_cpu/cpu0/snapshot: Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1 -------- -------- tracing_snapshot_write() [...] ring_buffer_lock_reserve() cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a'; [...] rb_reserve_next_event() [...] ring_buffer_swap_cpu() if (local_read(&cpu_buffer_a->committing)) goto out_dec; if (local_read(&cpu_buffer_b->committing)) goto out_dec; buffer_a->buffers[cpu] = cpu_buffer_b; buffer_b->buffers[cpu] = cpu_buffer_a; // 2. cpu_buffer has swapped here. rb_start_commit(cpu_buffer); if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer' [...] // has not changed here. return NULL; } cpu_buffer_b->buffer = buffer_a; cpu_buffer_a->buffer = buffer_b; [...] // 4. Reserve event from 'cpu_buffer_a'. ring_buffer_unlock_commit() [...] cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!! rb_commit(cpu_buffer) rb_end_commit() // 6. WARN for the wrong 'committing' state !!! Based on above analysis, we can easily reproduce by following testcase: ``` bash #!/bin/bash dmesg -n 7 sysctl -w kernel.panic_on_warn=1 TR=/sys/kernel/tracing echo 7 > ${TR}/buffer_size_kb echo "sched:sched_switch" > ${TR}/set_event while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & ``` To fix it, IIUC, we can use smp_call_function_single() to do the swap on the target cpu where the buffer is located, so that above race would be avoided. | ||||
| CVE-2025-10596 | 2 Online Exam Form Submission Project, Sourcecodester | 2 Online Exam Form Submission, Online Exam Form Submission | 2025-09-18 | 7.3 High |
| A vulnerability was found in SourceCodester Online Exam Form Submission 1.0. This affects an unknown part of the file /index.php. The manipulation of the argument usn results in sql injection. The attack can be launched remotely. The exploit has been made public and could be used. | ||||
| CVE-2025-10598 | 1 Sourcecodester | 1 Pet Grooming Management Software | 2025-09-18 | 7.3 High |
| A vulnerability was identified in SourceCodester Pet Grooming Management Software 1.0. This issue affects some unknown processing of the file /admin/search_product.php. Such manipulation of the argument group_id leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. | ||||