Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50336 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add null pointer check to attr_load_runs_vcn Some metadata files are handled before MFT. This adds a null pointer check for some corner cases that could lead to NPD while reading these metadata files for a malformed NTFS image. [ 240.190827] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 240.191583] #PF: supervisor read access in kernel mode [ 240.191956] #PF: error_code(0x0000) - not-present page [ 240.192391] PGD 0 P4D 0 [ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17 [ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300 [ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f [ 240.196642] RSP: 0018:ffff88800812f690 EFLAGS: 00000286 [ 240.197019] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a [ 240.197523] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60 [ 240.197877] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed [ 240.198292] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000 [ 240.198647] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [ 240.199410] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.200314] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0 [ 240.200839] Call Trace: [ 240.201104] <TASK> [ 240.201502] ? ni_load_mi+0x80/0x80 [ 240.202297] ? ___slab_alloc+0x465/0x830 [ 240.202614] attr_load_runs_vcn+0x8c/0x1a0 [ 240.202886] ? __kasan_slab_alloc+0x32/0x90 [ 240.203157] ? attr_data_write_resident+0x250/0x250 [ 240.203543] mi_read+0x133/0x2c0 [ 240.203785] mi_get+0x70/0x140 [ 240.204012] ni_load_mi_ex+0xfa/0x190 [ 240.204346] ? ni_std5+0x90/0x90 [ 240.204588] ? __kasan_kmalloc+0x88/0xb0 [ 240.204859] ni_enum_attr_ex+0xf1/0x1c0 [ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0 [ 240.205600] ? ntfs_load_attr_list+0xbe/0x300 [ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180 [ 240.206157] ntfs_iget5+0x56c/0x1870 [ 240.206510] ? ntfs_get_block_bmap+0x70/0x70 [ 240.206776] ? __kasan_kmalloc+0x88/0xb0 [ 240.207030] ? set_blocksize+0x95/0x150 [ 240.207545] ntfs_fill_super+0xb8f/0x1e20 [ 240.207839] ? put_ntfs+0x1d0/0x1d0 [ 240.208069] ? vsprintf+0x20/0x20 [ 240.208467] ? mutex_unlock+0x81/0xd0 [ 240.208846] ? set_blocksize+0x95/0x150 [ 240.209221] get_tree_bdev+0x232/0x370 [ 240.209804] ? put_ntfs+0x1d0/0x1d0 [ 240.210519] ntfs_fs_get_tree+0x15/0x20 [ 240.210991] vfs_get_tree+0x4c/0x130 [ 240.211455] path_mount+0x645/0xfd0 [ 240.211806] ? putname+0x80/0xa0 [ 240.212112] ? finish_automount+0x2e0/0x2e0 [ 240.212559] ? kmem_cache_free+0x110/0x390 [ 240.212906] ? putname+0x80/0xa0 [ 240.213329] do_mount+0xd6/0xf0 [ 240.213829] ? path_mount+0xfd0/0xfd0 [ 240.214246] ? __kasan_check_write+0x14/0x20 [ 240.214774] __x64_sys_mount+0xca/0x110 [ 240.215080] do_syscall_64+0x3b/0x90 [ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 240.215811] RIP: 0033:0x7f233b4e948a [ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 240.217615] RSP: 002b:00007fff02211ec8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 240.218718] RAX: ffffffffffffffda RBX: 0000561cdc35b060 RCX: 00007f233b4e948a [ 240.219556] RDX: 0000561cdc35b260 RSI: 0000561cdc35b2e0 RDI: 0000561cdc363af0 [ 240.219975] RBP: 0000000000000000 R08: 0000561cdc35b280 R09: 0000000000000020 [ 240.220403] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000561cdc363af0 [ 240.220803] R13: 000 ---truncated--- | ||||
| CVE-2022-50323 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: do not sense pfmemalloc status in skb_append_pagefrags() skb_append_pagefrags() is used by af_unix and udp sendpage() implementation so far. In commit 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status") we explained why we should not sense pfmemalloc status for pages owned by user space. We should also use skb_fill_page_desc_noacc() in skb_append_pagefrags() to avoid following KCSAN report: BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:323 [inline] lru_add_fn+0x327/0x410 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 lru_add_drain_cpu+0x73/0x250 mm/swap.c:669 lru_add_drain+0x21/0x60 mm/swap.c:773 free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311 tlb_batch_pages_flush mm/mmu_gather.c:59 [inline] tlb_flush_mmu_free mm/mmu_gather.c:256 [inline] tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263 tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363 exit_mmap+0x190/0x4d0 mm/mmap.c:3098 __mmput+0x27/0x1b0 kernel/fork.c:1185 mmput+0x3d/0x50 kernel/fork.c:1207 copy_process+0x19fc/0x2100 kernel/fork.c:2518 kernel_clone+0x166/0x550 kernel/fork.c:2671 __do_sys_clone kernel/fork.c:2812 [inline] __se_sys_clone kernel/fork.c:2796 [inline] __x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1817 [inline] __skb_fill_page_desc include/linux/skbuff.h:2432 [inline] skb_fill_page_desc include/linux/skbuff.h:2453 [inline] skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974 unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea00058fc188 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 | ||||
| CVE-2022-50331 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff88810152ad20 (size 8): comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s) hex dump (first 8 bytes): 68 77 73 69 6d 30 00 ff hwsim0.. backtrace: [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000c0228a5e>] kvasprintf+0xb5/0x140 [<00000000cff8c21f>] kvasprintf_const+0x55/0x180 [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150 [<000000000a80b139>] dev_set_name+0xab/0xe0 | ||||
| CVE-2022-50330 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: cavium - prevent integer overflow loading firmware The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "ntohl(ucode->code_length) * 2" multiplication can have an integer overflow. | ||||
| CVE-2022-50317 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: megachips: Fix a null pointer dereference bug When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed. | ||||
| CVE-2022-50337 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocxl: fix pci device refcount leak when calling get_function_0() get_function_0() calls pci_get_domain_bus_and_slot(), as comment says, it returns a pci device with refcount increment, so after using it, pci_dev_put() needs be called. Get the device reference when get_function_0() is not called, so pci_dev_put() can be called in the error path and callers unconditionally. And add comment above get_dvsec_vendor0() to tell callers to call pci_dev_put(). | ||||
| CVE-2023-53260 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_permission() Following process: P1 P2 path_lookupat link_path_walk inode_permission ovl_permission ovl_i_path_real(inode, &realpath) path->dentry = ovl_i_dentry_upper(inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL realinode = d_inode(realpath.dentry) // return NULL inode_permission(realinode) inode->i_sb // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 335.664979] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0 [ 335.669956] RIP: 0010:inode_permission+0x33/0x2c0 [ 335.678939] Call Trace: [ 335.679165] <TASK> [ 335.679371] ovl_permission+0xde/0x320 [ 335.679723] inode_permission+0x15e/0x2c0 [ 335.680090] link_path_walk+0x115/0x550 [ 335.680771] path_lookupat.isra.0+0xb2/0x200 [ 335.681170] filename_lookup+0xda/0x240 [ 335.681922] vfs_statx+0xa6/0x1f0 [ 335.682233] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-53259 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2023-53257 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check S1G action frame size Before checking the action code, check that it even exists in the frame. | ||||
| CVE-2023-53263 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit. | ||||
| CVE-2023-53290 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix fout leak in hbm's run_bpf_prog Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope. | ||||
| CVE-2023-53298 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: fix memory leak of se_io context in nfc_genl_se_io The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not. | ||||
| CVE-2023-53265 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ubi: ensure that VID header offset + VID header size <= alloc, size Ensure that the VID header offset + VID header size does not exceed the allocated area to avoid slab OOB. BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197 Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555 CPU: 2 PID: 1555 Comm: syz-executor136 Tainted: G W 6.0.0-1868 #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x85/0xad lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold.13+0xb6/0x6bb mm/kasan/report.c:433 kasan_report+0xa7/0x11b mm/kasan/report.c:495 crc32_body lib/crc32.c:111 [inline] crc32_le_generic lib/crc32.c:179 [inline] crc32_le_base+0x58c/0x626 lib/crc32.c:197 ubi_io_write_vid_hdr+0x1b7/0x472 drivers/mtd/ubi/io.c:1067 create_vtbl+0x4d5/0x9c4 drivers/mtd/ubi/vtbl.c:317 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 RIP: 0033:0x7f96d5cf753d Code: RSP: 002b:00007fffd72206f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96d5cf753d RDX: 0000000020000080 RSI: 0000000040186f40 RDI: 0000000000000003 RBP: 0000000000400cd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400be0 R13: 00007fffd72207e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 1555: kasan_save_stack+0x20/0x3d mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] __kasan_kmalloc+0x88/0xa3 mm/kasan/common.c:525 kasan_kmalloc include/linux/kasan.h:234 [inline] __kmalloc+0x138/0x257 mm/slub.c:4429 kmalloc include/linux/slab.h:605 [inline] ubi_alloc_vid_buf drivers/mtd/ubi/ubi.h:1093 [inline] create_vtbl+0xcc/0x9c4 drivers/mtd/ubi/vtbl.c:295 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 The buggy address belongs to the object at ffff88802bb36e00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff88802bb36e00, ffff88802bb36f00) The buggy address belongs to the physical page: page:00000000ea4d1263 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2bb36 head:00000000ea4d1263 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffffea000066c300 dead000000000003 ffff888100042b40 raw: 0000000000000000 00000000001 ---truncated--- | ||||
| CVE-2023-53267 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event() The kfree() should be called when memory fails to be allocated for cb_data in xlnx_add_cb_for_notify_event(), otherwise there will be a memory leak, so add kfree() to fix it. | ||||
| CVE-2023-53299 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix leak of 'r10bio->remaining' for recovery raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid. | ||||
| CVE-2023-53289 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: bdisp: Add missing check for create_workqueue Add the check for the return value of the create_workqueue in order to avoid NULL pointer dereference. | ||||
| CVE-2023-53295 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: Do not update file length for failed writes to inline files When write to inline file fails (or happens only partly), we still updated length of inline data as if the whole write succeeded. Fix the update of length of inline data to happen only if the write succeeds. | ||||
| CVE-2023-53271 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() There is a memory leaks problem reported by kmemleak: unreferenced object 0xffff888102007a00 (size 128): comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi] [<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi] [<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi] [<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170 [<ffffffff83c142a5>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This is due to a mismatch between create and destroy interfaces, and in detail that "new_eba_tbl" created by ubi_eba_create_table() but destroyed by kfree(), while will causing "new_eba_tbl->entries" not freed. Fix it by replacing kfree(new_eba_tbl) with ubi_eba_destroy_table(new_eba_tbl) | ||||
| CVE-2023-53280 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up gets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed previously in the commits tagged Fixed: below. | ||||
| CVE-2023-53282 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write During the sysfs firmware write process, a use-after-free read warning is logged from the lpfc_wr_object() routine: BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc] Use-after-free read at 0x0000000000cf164d (in kfence-#111): lpfc_wr_object+0x235/0x310 [lpfc] lpfc_write_firmware.cold+0x206/0x30d [lpfc] lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc] lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc] kernfs_fop_write_iter+0x121/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1ef/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x59/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The driver accessed wr_object pointer data, which was initialized into mailbox payload memory, after the mailbox object was released back to the mailbox pool. Fix by moving the mailbox free calls to the end of the routine ensuring that we don't reference internal mailbox memory after release. | ||||