Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49206 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in error flow for subscribe event routine In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak. | ||||
| CVE-2022-49203 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix double free during GPU reset on DC streams [Why] The issue only occurs during the GPU reset code path. We first backup the current state prior to commiting 0 streams internally from DM to DC. This state backup contains valid link encoder assignments. DC will clear the link encoder assignments as part of current state (but not the backup, since it was a copied before the commit) and free the extra stream reference it held. DC requires that the link encoder assignments remain cleared/invalid prior to commiting. Since the backup still has valid assignments we call the interface post reset to clear them. This routine also releases the extra reference that the link encoder interface held - resulting in a double free (and eventually a NULL pointer dereference). [How] We'll have to do a full DC commit anyway after GPU reset because the stream count previously went to 0. We don't need to retain the assignment that we had backed up, so just copy off of the now clean current state assignment after the reset has occcurred with the new link_enc_cfg_copy() interface. | ||||
| CVE-2022-49201 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ibmvnic: fix race between xmit and reset There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace: [c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220 --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid: ibmvnic_xmit() { ... tx_scrq = adapter->tx_scrq[queue_num]; txq = netdev_get_tx_queue(netdev, queue_num); ind_bufp = &tx_scrq->ind_buf; if (test_bit(0, &adapter->resetting)) { ... } But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing. Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields). We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the "back-end" of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts. IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active. So we will have: A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open() ->resetting = true ->tx_queues_active = false disable tx queues ... ->tx_queues_active = true start tx queues B. Tx interrupt in ibmvnic_complete_tx(): if (->tx_queues_active) netif_wake_subqueue(); To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which: - must also be taken in the interrupt path (ibmvnic_complete_tx()) - shared across the multiple ---truncated--- | ||||
| CVE-2022-49190 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case. | ||||
| CVE-2022-49187 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_hw_get_clk() when dev is NULL Any registered clk_core structure can have a NULL pointer in its dev field. While never actually documented, this is evidenced by the wide usage of clk_register and clk_hw_register with a NULL device pointer, and the fact that the core of_clk_hw_register() function also passes a NULL device pointer. A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that case will result in a NULL pointer derefence when it calls dev_name() on that NULL device pointer. Add a test for this case and use NULL as the dev_id if the device pointer is NULL. | ||||
| CVE-2022-49186 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: prevent array overflow in visconti_clk_register_gates() This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates(). | ||||
| CVE-2022-49185 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. | ||||
| CVE-2022-49184 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sparx5: switchdev: fix possible NULL pointer dereference As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer. | ||||
| CVE-2022-49182 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause "use after free" error. This patch adds a vlan list lock to protect the vlan list. | ||||
| CVE-2022-49179 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] ra ---truncated--- | ||||
| CVE-2022-49176 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bfq: fix use-after-free in bfq_dispatch_request KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x6 ---truncated--- | ||||
| CVE-2022-49155 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair() [ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e | ||||
| CVE-2022-49153 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wireguard: socket: free skb in send6 when ipv6 is disabled I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug. | ||||
| CVE-2022-49150 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. | ||||
| CVE-2022-49148 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Free the page array when watch_queue is dismantled Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] | ||||
| CVE-2022-49144 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memory leak of uid in files registration When there are no files for __io_sqe_files_scm() to process in the range, it'll free everything and return. However, it forgets to put uid. | ||||
| CVE-2022-49141 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: fix possible NULL pointer dereference As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer. | ||||
| CVE-2022-49139 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt This event is just specified for SCO and eSCO link types. On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR of an existing LE connection, LE link type and a status that triggers the second case of the packet processing a NULL pointer dereference happens, as conn->link is NULL. | ||||
| CVE-2022-49136 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed. | ||||
| CVE-2022-49134 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Guard against invalid local ports When processing events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not for the CPU port (local port 0), which exists, but does not have all the fields as any local port. This can result in a NULL pointer dereference when trying access 'struct mlxsw_sp_port' fields which are not initialized for CPU port. Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware") already handled such issue by bailing early when processing a PUDE event reported for the CPU port. Generalize the approach by moving the check to a common function and making use of it in all relevant places. | ||||