Total
1498 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-30904 | 1 Hpe | 1 Insight Remote Support | 2024-12-17 | 5.5 Medium |
| A security vulnerability in HPE Insight Remote Support may result in the local disclosure of privileged LDAP information. | ||||
| CVE-2024-55557 | 2024-12-17 | 9.8 Critical | ||
| ui/pref/ProxyPrefView.java in weasis-core in Weasis 4.5.1 has a hardcoded key for symmetric encryption of proxy credentials. | ||||
| CVE-2024-28146 | 2024-12-13 | 8.4 High | ||
| The application uses several hard-coded credentials to encrypt config files during backup, to decrypt the new firmware during an update and some passwords allow a direct connection to the database server of the affected device. | ||||
| CVE-2023-25187 | 1 Nokia | 2 Asika Airscale, Asika Airscale Firmware | 2024-12-12 | 6.3 Medium |
| An issue was discovered on NOKIA Airscale ASIKA Single RAN devices before 21B. Nokia Single RAN commissioning procedures do not change (factory-time installed) default SSH public/private key values that are specific to a network operator. As a result, the CSP internal BTS network SSH server (disabled by default) continues to apply the default SSH public/private key values. These keys don't give access to BTS, because service user authentication is username/password-based on top of SSH. Nokia factory installed default SSH keys are meant to be changed from operator-specific values during the BTS deployment commissioning phase. However, before the 21B release, BTS commissioning manuals did not provide instructions to change default SSH keys (to BTS operator-specific values). This leads to a possibility for malicious operations staff (inside a CSP network) to attempt MITM exploitation of BTS service user access, during the moments that SSH is enabled for Nokia service personnel to perform troubleshooting activities. | ||||
| CVE-2024-54749 | 2024-12-12 | 7.5 High | ||
| Ubiquiti U7-Pro 7.0.35 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root. NOTE: this is disputed by the Supplier because the observation only established that a password is present in a firmware image; however, the device cannot be deployed without setting a new password during installation. | ||||
| CVE-2024-41777 | 1 Ibm | 1 Cognos Controller | 2024-12-11 | 7.5 High |
| IBM Cognos Controller 11.0.0 and 11.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. | ||||
| CVE-2024-54750 | 1 Ui | 1 U6-lr Firmware | 2024-12-09 | 9.8 Critical |
| Ubiquiti U6-LR 6.6.65 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root. NOTE: In Ubiquiti's view there is no vulnerability as the Hardcoded Password should be after setup not before. | ||||
| CVE-2023-4419 | 1 Sick | 7 Lms500, Lms500 Firmware, Lms511 and 4 more | 2024-12-09 | 9.8 Critical |
| The LMS5xx uses hard-coded credentials, which potentially allow low-skilled unauthorized remote attackers to reconfigure settings and /or disrupt the functionality of the device. | ||||
| CVE-2023-32274 | 1 Enphase | 1 Installer Toolkit | 2024-12-06 | 8.6 High |
| Enphase Installer Toolkit versions 3.27.0 has hard coded credentials embedded in binary code in the Android application. An attacker can exploit this and gain access to sensitive information. | ||||
| CVE-2024-53614 | 2024-12-04 | 6.5 Medium | ||
| A hardcoded decryption key in Thinkware Cloud APK v4.3.46 allows attackers to access sensitive data and execute arbitrary commands with elevated privileges. | ||||
| CVE-2023-28387 | 1 Uzabase | 1 Newspicks | 2024-12-04 | 5.5 Medium |
| "NewsPicks" App for Android versions 10.4.5 and earlier and "NewsPicks" App for iOS versions 10.4.2 and earlier use hard-coded credentials, which may allow a local attacker to analyze data in the app and to obtain API key for an external service. | ||||
| CVE-2024-53484 | 1 Ever | 1 Traduora | 2024-12-03 | 8.8 High |
| Ever Traduora 0.20.0 and below is vulnerable to Privilege Escalation due to the use of a hard-coded JWT signing key. | ||||
| CVE-2018-0141 | 1 Cisco | 3 Prime Collaboration, Prime Collaboration Assurance, Prime Collaboration Provisioning | 2024-12-02 | N/A |
| A vulnerability in Cisco Prime Collaboration Provisioning (PCP) Software 11.6 could allow an unauthenticated, local attacker to log in to the underlying Linux operating system. The vulnerability is due to a hard-coded account password on the system. An attacker could exploit this vulnerability by connecting to the affected system via Secure Shell (SSH) using the hard-coded credentials. A successful exploit could allow the attacker to access the underlying operating system as a low-privileged user. After low-level privileges are gained, the attacker could elevate to root privileges and take full control of the device. Cisco Bug IDs: CSCvc82982. | ||||
| CVE-2018-0150 | 1 Cisco | 3 4431 Integrated Services Router, 4451 Integrated Services Router, Ios Xe | 2024-12-02 | 9.8 Critical |
| A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880. | ||||
| CVE-2023-28895 | 1 Preh | 2 Mib3, Mib3 Firmware | 2024-12-02 | 3.5 Low |
| The password for access to the debugging console of the PoWer Controller chip (PWC) of the MIB3 infotainment is hard-coded in the firmware. The console allows attackers with physical access to the MIB3 unit to gain full control over the PWC chip. Vulnerability found on Škoda Superb III (3V3) - 2.0 TDI manufactured in 2022. | ||||
| CVE-2023-39169 | 1 Enbw | 2 Senec Storage Box, Senec Storage Box Firmware | 2024-12-02 | 9.8 Critical |
| The affected devices use publicly available default credentials with administrative privileges. | ||||
| CVE-2018-0222 | 1 Cisco | 1 Digital Network Architecture Center | 2024-11-29 | N/A |
| A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to log in to an affected system by using an administrative account that has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the default administrative account for the affected software. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands with root privileges. This vulnerability affects all releases of Cisco DNA Center Software prior to Release 1.1.3. Cisco Bug IDs: CSCvh98929. | ||||
| CVE-2018-0329 | 1 Cisco | 1 Wide Area Application Services | 2024-11-29 | 5.3 Medium |
| A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to a hard-coded, read-only community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 2c queries to an affected device. A successful exploit could allow the attacker to read any data that is accessible via SNMP on the affected device. Note: The static credentials are defined in an internal configuration file and are not visible in the current operation configuration ('running-config') or the startup configuration ('startup-config'). Cisco Bug IDs: CSCvi40137. | ||||
| CVE-2018-0375 | 1 Cisco | 2 Mobility Services Engine, Policy Suite | 2024-11-29 | N/A |
| A vulnerability in the Cluster Manager of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to log in to an affected system using the root account, which has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the root account. An attacker could exploit this vulnerability by using the account to log in to an affected system. An exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user. Cisco Bug IDs: CSCvh02680. | ||||
| CVE-2023-43870 | 1 Paxton-access | 1 Net2 | 2024-11-27 | 8.1 High |
| When installing the Net2 software a root certificate is installed into the trusted store. A potential hacker could access the installer batch file or reverse engineer the source code to gain access to the root certificate password. Using the root certificate and password they could then create their own certificates to emulate another site. Then by establishing a proxy service to emulate the site they could monitor traffic passed between the end user and the site allowing access to the data content. | ||||