Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49997 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lantiq_xrx200: restore buffer if memory allocation failed In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. | ||||
| CVE-2022-50004 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0 | ||||
| CVE-2022-50080 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early. | ||||
| CVE-2022-50207 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: bcm: Fix refcount leak in bcm_kona_smc_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50124 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-49938 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix small mempool leak in SMB2_negotiate() In some cases of failure (dialect mismatches) in SMB2_negotiate(), after the request is sent, the checks would return -EIO when they should be rather setting rc = -EIO and jumping to neg_exit to free the response buffer from mempool. | ||||
| CVE-2022-50219 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix KASAN use-after-free Read in compute_effective_progs Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error. To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it. | ||||
| CVE-2022-50076 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix memory leak on the deferred close xfstests on smb21 report kmemleak as below: unreferenced object 0xffff8881767d6200 (size 64): comm "xfs_io", pid 1284, jiffies 4294777434 (age 20.789s) hex dump (first 32 bytes): 80 5a d0 11 81 88 ff ff 78 8a aa 63 81 88 ff ff .Z......x..c.... 00 71 99 76 81 88 ff ff 00 00 00 00 00 00 00 00 .q.v............ backtrace: [<00000000ad04e6ea>] cifs_close+0x92/0x2c0 [<0000000028b93c82>] __fput+0xff/0x3f0 [<00000000d8116851>] task_work_run+0x85/0xc0 [<0000000027e14f9e>] do_exit+0x5e5/0x1240 [<00000000fb492b95>] do_group_exit+0x58/0xe0 [<00000000129a32d9>] __x64_sys_exit_group+0x28/0x30 [<00000000e3f7d8e9>] do_syscall_64+0x35/0x80 [<00000000102e8a0b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 When cancel the deferred close work, we should also cleanup the struct cifs_deferred_close. | ||||
| CVE-2022-50226 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak For some sev ioctl interfaces, input may be passed that is less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the buffer, the sev ioctl interfaces with the issue may return uninitialized slab memory. Currently, all of the ioctl interfaces in the ccp driver are safe, but to prevent future problems, change all ioctl interfaces that allocate memory with kmalloc to use kzalloc and memset the data buffer to zero in sev_ioctl_do_platform_status. | ||||
| CVE-2022-50061 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: nomadik: Fix refcount leak in nmk_pinctrl_dt_subnode_to_map of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak." | ||||
| CVE-2022-49972 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Fix corrupted packets for XDP_SHARED_UMEM Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where packets are corrupted for the second and any further sockets bound to the same umem. In other words, this does not affect the first socket bound to the umem. The culprit for this bug is that the initialization of the DMA addresses for the pre-populated xsk buffer pool entries was not performed for any socket but the first one bound to the umem. Only the linear array of DMA addresses was populated. Fix this by populating the DMA addresses in the xsk buffer pool for every socket bound to the same umem. | ||||
| CVE-2022-50129 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> | ||||
| CVE-2022-49957 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. | ||||
| CVE-2022-50029 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: dont disable gcc_sleep_clk_src Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock. | ||||
| CVE-2022-50097 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: s3fb: Check the size of screen before memset_io() In the function s3fb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000 [ 54.083742] #PF: supervisor write access in kernel mode [ 54.083744] #PF: error_code(0x0002) - not-present page [ 54.083760] RIP: 0010:memset_orig+0x33/0xb0 [ 54.083782] Call Trace: [ 54.083788] s3fb_set_par+0x1ec6/0x4040 [ 54.083806] fb_set_var+0x604/0xeb0 [ 54.083836] do_fb_ioctl+0x234/0x670 Fix the this by checking the value of 'screen_size' before memset_io(). | ||||
| CVE-2022-50057 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix NULL deref in ntfs_update_mftmirr If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL. Code should check this ptr before dereferencing. Syzbot hit this issue via passing wrong mount param as can be seen from log below Fail log: ntfs3: Unknown parameter 'iochvrset' general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0 ... Call Trace: <TASK> put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463 ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363 put_fs_context+0x119/0x7a0 fs/fs_context.c:469 do_new_mount+0x2b4/0xad0 fs/namespace.c:3044 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] | ||||
| CVE-2022-49968 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154/adf7242: defer destroy_workqueue call There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. runs") | ||||
| CVE-2022-50119 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: Fix possible refcount leak in rpmsg_register_device_override() rpmsg_register_device_override need to call put_device to free vch when driver_set_override fails. Fix this by adding a put_device() to the error path. | ||||
| CVE-2022-50227 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Initialize Xen timer only once Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl | ||||
| CVE-2022-50044 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: start MHI channel after endpoit creation MHI channel may generates event/interrupt right after enabling. It may leads to 2 race conditions issues. 1) Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check: if (!qdev || mhi_res->transaction_status) return; Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at this moment. In this situation qrtr-ns will be unable to enumerate services in device. --------------------------------------------------------------- 2) Such event may come at the moment after dev_set_drvdata() and before qrtr_endpoint_register(). In this case kernel will panic with accessing wrong pointer at qcom_mhi_qrtr_dl_callback(): rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr, mhi_res->bytes_xferd); Because endpoint is not created yet. -------------------------------------------------------------- So move mhi_prepare_for_transfer_autoqueue after endpoint creation to fix it. | ||||