Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50063 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: suppress non-changes to the tagging protocol The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0 | ||||
| CVE-2022-49913 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix inode list leak during backref walking at find_parent_nodes() During backref walking, at find_parent_nodes(), if we are dealing with a data extent and we get an error while resolving the indirect backrefs, at resolve_indirect_refs(), or in the while loop that iterates over the refs in the direct refs rbtree, we end up leaking the inode lists attached to the direct refs we have in the direct refs rbtree that were not yet added to the refs ulist passed as argument to find_parent_nodes(). Since they were not yet added to the refs ulist and prelim_release() does not free the lists, on error the caller can only free the lists attached to the refs that were added to the refs ulist, all the remaining refs get their inode lists never freed, therefore leaking their memory. Fix this by having prelim_release() always free any attached inode list to each ref found in the rbtree, and have find_parent_nodes() set the ref's inode list to NULL once it transfers ownership of the inode list to a ref added to the refs ulist passed to find_parent_nodes(). | ||||
| CVE-2022-50198 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50217 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: write inode in fuse_release() A race between write(2) and close(2) allows pages to be dirtied after fuse_flush -> write_inode_now(). If these pages are not flushed from fuse_release(), then there might not be a writable open file later. So any remaining dirty pages must be written back before the file is released. This is a partial revert of the blamed commit. | ||||
| CVE-2022-50152 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50121 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50153 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-50042 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: genl: fix error path memory leak in policy dumping If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer. | ||||
| CVE-2022-50072 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Fix a use-after-free bug in open If someone cancels the open RPC call, then we must not try to free either the open slot or the layoutget operation arguments, since they are likely still in use by the hung RPC call. | ||||
| CVE-2022-50093 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d | ||||
| CVE-2022-49970 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix kernel BUG in purge_effective_progs Syzkaller reported a triggered kernel BUG as follows: ------------[ cut here ]------------ kernel BUG at kernel/bpf/cgroup.c:925! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0 Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84 28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48 8b 0c5 RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578 RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000 R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00 FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0 Call Trace: <TASK> cgroup_bpf_prog_detach+0xcc/0x100 __sys_bpf+0x2273/0x2a00 __x64_sys_bpf+0x17/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f68214dbcb9 Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff8 RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9 RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009 RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003 R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20 R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Repetition steps: For the following cgroup tree, root | cg1 | cg2 1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs attach type is NONE or OVERRIDE. 2. write 1 to /proc/thread-self/fail-nth for failslab. 3. detach prog1 for cg1, and then kernel BUG occur. Failslab injection will cause kmalloc fail and fall back to purge_effective_progs. The problem is that cg2 have attached another prog, so when go through cg2 layer, iteration will add pos to 1, and subsequent operations will be skipped by the following condition, and cg will meet NULL in the end. `if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))` The NULL cg means no link or prog match, this is as expected, and it's not a bug. So here just skip the no match situation. | ||||
| CVE-2022-50205 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Add more validity checks for inode counts Add checks verifying number of inodes stored in the superblock matches the number computed from number of inodes per group. Also verify we have at least one block worth of inodes per group. This prevents crashes on corrupted filesystems. | ||||
| CVE-2022-50196 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: ocmem: Fix refcount leak in of_get_ocmem of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. | ||||
| CVE-2022-50106 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() in the error path to avoid refcount leak. | ||||
| CVE-2022-50065 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix memory leak inside XPD_TX with mergeable When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp". | ||||
| CVE-2022-49987 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md: call __md_stop_writes in md_stop From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a | ||||
| CVE-2022-50046 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sunrpc: fix potential memory leaks in rpc_sysfs_xprt_state_change() The issue happens on some error handling paths. When the function fails to grab the object `xprt`, it simply returns 0, forgetting to decrease the reference count of another object `xps`, which is increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount leaks. Also, the function forgets to check whether `xps` is valid before using it, which may result in NULL-dereferencing issues. Fix it by adding proper error handling code when either `xprt` or `xps` is NULL. | ||||
| CVE-2022-50188 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: Fix refcount leak in meson_encoder_hdmi_init of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() in error path to avoid refcount leak. | ||||
| CVE-2022-50131 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: prevent a buffer overflow in mcp_smbus_write() Smatch Warning: drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() '&mcp->txbuf[5]' too small (59 vs 255) drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf' too small (34 vs 255) The 'len' variable can take a value between 0-255 as it can come from data->block[0] and it is user data. So add an bound check to prevent a buffer overflow in memcpy(). | ||||
| CVE-2022-50202 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PM: hibernate: defer device probing when resuming from hibernation syzbot is reporting hung task at misc_open() [1], for there is a race window of AB-BA deadlock which involves probe_count variable. Currently wait_for_device_probe() from snapshot_open() from misc_open() can sleep forever with misc_mtx held if probe_count cannot become 0. When a device is probed by hub_event() work function, probe_count is incremented before the probe function starts, and probe_count is decremented after the probe function completed. There are three cases that can prevent probe_count from dropping to 0. (a) A device being probed stopped responding (i.e. broken/malicious hardware). (b) A process emulating a USB device using /dev/raw-gadget interface stopped responding for some reason. (c) New device probe requests keeps coming in before existing device probe requests complete. The phenomenon syzbot is reporting is (b). A process which is holding system_transition_mutex and misc_mtx is waiting for probe_count to become 0 inside wait_for_device_probe(), but the probe function which is called from hub_event() work function is waiting for the processes which are blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface. This patch mitigates (b) by deferring wait_for_device_probe() from snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that the possibility of (b) remains as long as any thread which is emulating a USB device via /dev/raw-gadget interface can be blocked by uninterruptible blocking operations (e.g. mutex_lock()). Please also note that (a) and (c) are not addressed. Regarding (c), we should change the code to wait for only one device which contains the image for resuming from hibernation. I don't know how to address (a), for use of timeout for wait_for_device_probe() might result in loss of user data in the image. Maybe we should require the userland to wait for the image device before opening /dev/snapshot interface. | ||||