Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38021 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dpp Similar to commit 6a057072ddd1 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null pointer dereference on dcn20_update_dchubp_dpp. This is the same function hooked for update_dchubp_dpp in dcn401, with the same issue. Fix possible null pointer deference on dcn401_program_pipe too. (cherry picked from commit d8d47f739752227957d8efc0cb894761bfe1d879) | ||||
| CVE-2025-38025 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7606: check for NULL before calling sw_mode_config() Check that the sw_mode_config function pointer is not NULL before calling it. Not all buses define this callback, which resulted in a NULL pointer dereference. | ||||
| CVE-2025-38015 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix memory leak in error handling path of idxd_alloc Memory allocated for idxd is not freed if an error occurs during idxd_alloc(). To fix it, free the allocated memory in the reverse order of allocation before exiting the function in case of an error. | ||||
| CVE-2025-38009 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-38017 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/eventpoll: fix endless busy loop after timeout has expired After commit 0a65bc27bd64 ("eventpoll: Set epoll timeout if it's in the future"), the following program would immediately enter a busy loop in the kernel: ``` int main() { int e = epoll_create1(0); struct epoll_event event = {.events = EPOLLIN}; epoll_ctl(e, EPOLL_CTL_ADD, 0, &event); const struct timespec timeout = {.tv_nsec = 1}; epoll_pwait2(e, &event, 1, &timeout, 0); } ``` This happens because the given (non-zero) timeout of 1 nanosecond usually expires before ep_poll() is entered and then ep_schedule_timeout() returns false, but `timed_out` is never set because the code line that sets it is skipped. This quickly turns into a soft lockup, RCU stalls and deadlocks, inflicting severe headaches to the whole system. When the timeout has expired, we don't need to schedule a hrtimer, but we should set the `timed_out` variable. Therefore, I suggest moving the ep_schedule_timeout() check into the `timed_out` expression instead of skipping it. brauner: Note that there was an earlier fix by Joe Damato in response to my bug report in [1]. | ||||
| CVE-2025-38008 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: fix race condition in unaccepted memory handling The page allocator tracks the number of zones that have unaccepted memory using static_branch_enc/dec() and uses that static branch in hot paths to determine if it needs to deal with unaccepted memory. Borislav and Thomas pointed out that the tracking is racy: operations on static_branch are not serialized against adding/removing unaccepted pages to/from the zone. Sanity checks inside static_branch machinery detects it: WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0 The comment around the WARN() explains the problem: /* * Warn about the '-1' case though; since that means a * decrement is concurrent with a first (0->1) increment. IOW * people are trying to disable something that wasn't yet fully * enabled. This suggests an ordering problem on the user side. */ The effect of this static_branch optimization is only visible on microbenchmark. Instead of adding more complexity around it, remove it altogether. | ||||
| CVE-2025-38018 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: fix kernel panic when alloc_page failed We cannot set frag_list to NULL pointer when alloc_page failed. It will be used in tls_strp_check_queue_ok when the next time tls_strp_read_sock is called. This is because we don't reset full_len in tls_strp_flush_anchor_copy() so the recv path will try to continue handling the partial record on the next call but we dettached the rcvq from the frag list. Alternative fix would be to reset full_len. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Call trace: tls_strp_check_rcv+0x128/0x27c tls_strp_data_ready+0x34/0x44 tls_data_ready+0x3c/0x1f0 tcp_data_ready+0x9c/0xe4 tcp_data_queue+0xf6c/0x12d0 tcp_rcv_established+0x52c/0x798 | ||||
| CVE-2025-38024 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work. | ||||
| CVE-2025-38027 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: max20086: fix invalid memory access max20086_parse_regulators_dt() calls of_regulator_match() using an array of struct of_regulator_match allocated on the stack for the matches argument. of_regulator_match() calls devm_of_regulator_put_matches(), which calls devres_alloc() to allocate a struct devm_of_regulator_matches which will be de-allocated using devm_of_regulator_put_matches(). struct devm_of_regulator_matches is populated with the stack allocated matches array. If the device fails to probe, devm_of_regulator_put_matches() will be called and will try to call of_node_put() on that stack pointer, generating the following dmesg entries: max20086 6-0028: Failed to read DEVICE_ID reg: -121 kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet kobject_put() is being called. Followed by a stack trace matching the call flow described above. Switch to allocating the matches array using devm_kcalloc() to avoid accessing the stack pointer long after it's out of scope. This also has the advantage of allowing multiple max20086 to probe without overriding the data stored inside the global of_regulator_match. | ||||
| CVE-2025-38014 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Refactor remove call with idxd_cleanup() helper The idxd_cleanup() helper cleans up perfmon, interrupts, internals and so on. Refactor remove call with the idxd_cleanup() helper to avoid code duplication. Note, this also fixes the missing put_device() for idxd groups, enginces and wqs. | ||||
| CVE-2025-38016 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: abort dispatch if device destroyed The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") | ||||
| CVE-2025-38013 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request Make sure that n_channels is set after allocating the struct cfg80211_registered_device::int_scan_req member. Seen with syzkaller: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5 index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]') This was missed in the initial conversions because I failed to locate the allocation likely due to the "sizeof(void *)" not matching the "channels" array type. | ||||
| CVE-2025-38012 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops. | ||||
| CVE-2025-38006 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: Don't access ifa_index when missing In mctp_dump_addrinfo, ifa_index can be used to filter interfaces, but only when the struct ifaddrmsg is provided. Otherwise it will be comparing to uninitialised memory - reproducible in the syzkaller case from dhcpd, or busybox "ip addr show". The kernel MCTP implementation has always filtered by ifa_index, so existing userspace programs expecting to dump MCTP addresses must already be passing a valid ifa_index value (either 0 or a real index). BUG: KMSAN: uninit-value in mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128 mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128 rtnl_dump_all+0x3ec/0x5b0 net/core/rtnetlink.c:4380 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6824 netlink_dump+0x97b/0x1690 net/netlink/af_netlink.c:2309 | ||||
| CVE-2025-38010 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. | ||||
| CVE-2025-38022 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent(). | ||||
| CVE-2025-38007 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Add NULL check in uclogic_input_configured() devm_kasprintf() returns NULL when memory allocation fails. Currently, uclogic_input_configured() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. | ||||
| CVE-2025-38028 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: Fix a race in nfs_local_open_fh() Once the clp->cl_uuid.lock has been dropped, another CPU could come in and free the struct nfsd_file that was just added. To prevent that from happening, take the RCU read lock before dropping the spin lock. | ||||
| CVE-2025-38031 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: padata: do not leak refcount in reorder_work A recent patch that addressed a UAF introduced a reference count leak: the parallel_data refcount is incremented unconditionally, regardless of the return value of queue_work(). If the work item is already queued, the incremented refcount is never decremented. Fix this by checking the return value of queue_work() and decrementing the refcount when necessary. Resolves: Unreferenced object 0xffff9d9f421e3d80 (size 192): comm "cryptomgr_probe", pid 157, jiffies 4294694003 hex dump (first 32 bytes): 80 8b cf 41 9f 9d ff ff b8 97 e0 89 ff ff ff ff ...A............ d0 97 e0 89 ff ff ff ff 19 00 00 00 1f 88 23 00 ..............#. backtrace (crc 838fb36): __kmalloc_cache_noprof+0x284/0x320 padata_alloc_pd+0x20/0x1e0 padata_alloc_shell+0x3b/0xa0 0xffffffffc040a54d cryptomgr_probe+0x43/0xc0 kthread+0xf6/0x1f0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2025-38019 | 1 Linux | 1 Linux Kernel | 2025-06-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices The driver only offloads neighbors that are constructed on top of net devices registered by it or their uppers (which are all Ethernet). The device supports GRE encapsulation and decapsulation of forwarded traffic, but the driver will not offload dummy neighbors constructed on top of GRE net devices as they are not uppers of its net devices: # ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1 # ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 NOARP (Note that the neighbor is not marked with 'offload') When the driver is reloaded and the existing configuration is replayed, the driver does not perform the same check regarding existing neighbors and offloads the previously added one: # devlink dev reload pci/0000:01:00.0 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 offload NOARP If the neighbor is later deleted, the driver will ignore the notification (given the GRE net device is not its upper) and will therefore keep referencing freed memory, resulting in a use-after-free [1] when the net device is deleted: # ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1 # ip link del dev gre1 Fix by skipping neighbor replay if the net device for which the replay is performed is not our upper. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200 Read of size 8 at addr ffff888155b0e420 by task ip/2282 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 mlxsw_sp_neigh_entry_update+0x1ea/0x200 mlxsw_sp_router_rif_gone_sync+0x2a8/0x440 mlxsw_sp_rif_destroy+0x1e9/0x750 mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0 mlxsw_sp_router_netdevice_event+0x3ac/0x15e0 notifier_call_chain+0xca/0x150 call_netdevice_notifiers_info+0x7f/0x100 unregister_netdevice_many_notify+0xc8c/0x1d90 rtnl_dellink+0x34e/0xa50 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||