Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15481 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-28182 | 4 Debian, Fedoraproject, Nghttp2 and 1 more | 9 Debian Linux, Fedora, Nghttp2 and 6 more | 2025-09-02 | 5.3 Medium |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. | ||||
| CVE-2023-5568 | 2 Redhat, Samba | 3 Enterprise Linux, Storage, Samba | 2025-09-02 | 5.9 Medium |
| A heap-based Buffer Overflow flaw was discovered in Samba. It could allow a remote, authenticated attacker to exploit this vulnerability to cause a denial of service. | ||||
| CVE-2023-4693 | 2 Gnu, Redhat | 2 Grub2, Enterprise Linux | 2025-09-02 | 5.3 Medium |
| An out-of-bounds read flaw was found on grub2's NTFS filesystem driver. This issue may allow a physically present attacker to present a specially crafted NTFS file system image to read arbitrary memory locations. A successful attack allows sensitive data cached in memory or EFI variable values to be leaked, presenting a high Confidentiality risk. | ||||
| CVE-2023-4692 | 2 Gnu, Redhat | 2 Grub2, Enterprise Linux | 2025-09-02 | 7.5 High |
| An out-of-bounds write flaw was found in grub2's NTFS filesystem driver. This issue may allow an attacker to present a specially crafted NTFS filesystem image, leading to grub's heap metadata corruption. In some circumstances, the attack may also corrupt the UEFI firmware heap metadata. As a result, arbitrary code execution and secure boot protection bypass may be achieved. | ||||
| CVE-2025-3576 | 1 Redhat | 9 Ansible Automation Platform, Discovery, Enterprise Linux and 6 more | 2025-09-02 | 5.9 Medium |
| A vulnerability in the MIT Kerberos implementation allows GSSAPI-protected messages using RC4-HMAC-MD5 to be spoofed due to weaknesses in the MD5 checksum design. If RC4 is preferred over stronger encryption types, an attacker could exploit MD5 collisions to forge message integrity codes. This may lead to unauthorized message tampering. | ||||
| CVE-2025-4373 | 1 Redhat | 8 Enterprise Linux, Insights Proxy, Openshift Distributed Tracing and 5 more | 2025-09-02 | 4.8 Medium |
| A flaw was found in GLib, which is vulnerable to an integer overflow in the g_string_insert_unichar() function. When the position at which to insert the character is large, the position will overflow, leading to a buffer underwrite. | ||||
| CVE-2025-4598 | 5 Debian, Linux, Oracle and 2 more | 7 Debian Linux, Linux Kernel, Linux and 4 more | 2025-09-01 | 4.7 Medium |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process. A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. | ||||
| CVE-2024-5535 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2025-09-01 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2025-5318 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Openshift and 1 more | 2025-08-31 | 5.4 Medium |
| A flaw was found in the libssh library. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. | ||||
| CVE-2025-7345 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-08-31 | 7.5 High |
| A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution. | ||||
| CVE-2024-0567 | 5 Debian, Fedoraproject, Gnu and 2 more | 9 Debian Linux, Fedora, Gnutls and 6 more | 2025-08-31 | 7.5 High |
| A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack. | ||||
| CVE-2025-49178 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-08-30 | 5.5 Medium |
| A flaw was found in the X server's request handling. Non-zero 'bytes to ignore' in a client's request can cause the server to skip processing another client's request, potentially leading to a denial of service. | ||||
| CVE-2025-5278 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-08-30 | 4.4 Medium |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. | ||||
| CVE-2025-46400 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a segmentation fault while running fig2dev allows an attacker to availability via local input manipulation via read_arcobject function. | ||||
| CVE-2025-46399 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| A flaw was found in fig2dev. This vulnerability allows availability via local input manipulation via genge_itp_spline function. | ||||
| CVE-2025-46398 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a stack-overflow while running fig2dev allows memory corruption via local input manipulation via read_objects function. | ||||
| CVE-2025-46397 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a stack-overflow while running fig2dev allows memory corruption via local input manipulation at the bezier_spline function. | ||||
| CVE-2024-8775 | 1 Redhat | 7 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 4 more | 2025-08-30 | 5.5 Medium |
| A flaw was found in Ansible, where sensitive information stored in Ansible Vault files can be exposed in plaintext during the execution of a playbook. This occurs when using tasks such as include_vars to load vaulted variables without setting the no_log: true parameter, resulting in sensitive data being printed in the playbook output or logs. This can lead to the unintentional disclosure of secrets like passwords or API keys, compromising security and potentially allowing unauthorized access or actions. | ||||
| CVE-2024-7006 | 2 Libtiff, Redhat | 6 Libtiff, Enterprise Linux, Enterprise Linux For Arm 64 and 3 more | 2025-08-30 | 7.5 High |
| A null pointer dereference flaw was found in Libtiff via `tif_dirinfo.c`. This issue may allow an attacker to trigger memory allocation failures through certain means, such as restricting the heap space size or injecting faults, causing a segmentation fault. This can cause an application crash, eventually leading to a denial of service. | ||||
| CVE-2024-6409 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2025-08-30 | 7 High |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. | ||||