Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15481 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49081 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: highmem: fix checks in __kmap_local_sched_{in,out} When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. | ||||
| CVE-2022-49080 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix mpol_new leak in shared_policy_replace If mpol_new is allocated but not used in restart loop, mpol_new will be freed via mpol_put before returning to the caller. But refcnt is not initialized yet, so mpol_put could not do the right things and might leak the unused mpol_new. This would happen if mempolicy was updated on the shared shmem file while the sp->lock has been dropped during the memory allocation. This issue could be triggered easily with the below code snippet if there are many processes doing the below work at the same time: shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT); shm = shmat(shmid, 0, 0); loop many times { mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0); mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask, maxnode, 0); } | ||||
| CVE-2022-49072 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: Restrict usage of GPIO chip irq members before initialization GPIO chip irq members are exposed before they could be completely initialized and this leads to race conditions. One such issue was observed for the gc->irq.domain variable which was accessed through the I2C interface in gpiochip_to_irq() before it could be initialized by gpiochip_add_irqchip(). This resulted in Kernel NULL pointer dereference. Following are the logs for reference :- kernel: Call Trace: kernel: gpiod_to_irq+0x53/0x70 kernel: acpi_dev_gpio_irq_get_by+0x113/0x1f0 kernel: i2c_acpi_get_irq+0xc0/0xd0 kernel: i2c_device_probe+0x28a/0x2a0 kernel: really_probe+0xf2/0x460 kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0 To avoid such scenarios, restrict usage of GPIO chip irq members before they are completely initialized. | ||||
| CVE-2022-49070 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix unregistering of framebuffers without device OF framebuffers do not have an underlying device in the Linux device hierarchy. Do a regular unregister call instead of hot unplugging such a non-existing device. Fixes a NULL dereference. An example error message on ppc64le is shown below. BUG: Kernel NULL pointer dereference on read at 0x00000060 Faulting instruction address: 0xc00000000080dfa4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [...] CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1 NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430 REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000 CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029 GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000 GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283 GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80 GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0 GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0 GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0 NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0 [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable) [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150 [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0 [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm] [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs] [...] [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0 [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250 The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal"). Most firmware framebuffers have an underlying platform device, which can be hot-unplugged before loading the native graphics driver. OF framebuffers do not (yet) have that device. Fix the code by unregistering the framebuffer as before without a hot unplug. Tested with 5.17 on qemu ppc64le emulation. | ||||
| CVE-2022-49066 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: veth: Ensure eth header is in skb's linear part After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0 | ||||
| CVE-2022-49060 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() dev_name() was called with dev.parent as argument but without to NULL-check it before. Solve this by checking the pointer before the call to dev_name(). | ||||
| CVE-2022-49058 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: potential buffer overflow in handling symlinks Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer. | ||||
| CVE-2022-49057 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: null_blk: end timed out poll request When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler. | ||||
| CVE-2022-49049 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix panic when growing a memfd_secret When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] [axelrasmussen@google.com: return EINVAL] | ||||
| CVE-2022-49029 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free(). | ||||
| CVE-2022-49028 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ixgbevf: Fix resource leak in ixgbevf_init_module() ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") | ||||
| CVE-2022-49022 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 | ||||
| CVE-2022-49014 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tun: Fix use-after-free in tun_detach() syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. | ||||
| CVE-2022-49011 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. | ||||
| CVE-2022-49010 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Check for null before removing sysfs attrs If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. | ||||
| CVE-2022-49006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the "type" field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number. When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="��������������������������������������� ---truncated--- | ||||
| CVE-2022-48997 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: char: tpm: Protect tpm_pm_suspend with locks Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. [Jason: reworked commit message, added metadata] | ||||
| CVE-2022-48992 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test. | ||||
| CVE-2022-48991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables. | ||||
| CVE-2022-48989 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscache: Fix oops due to race with cookie_lru and use_cookie If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100 | ||||