Filtered by vendor Linux
Subscriptions
Total
13522 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53089 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix task hung in ext4_xattr_delete_inode Syzbot reported a hung task problem: ================================================================== INFO: task syz-executor232:5073 blocked for more than 143 seconds. Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5244 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6555 schedule+0xcb/0x190 kernel/sched/core.c:6631 __wait_on_freeing_inode fs/inode.c:2196 [inline] find_inode_fast+0x35a/0x4c0 fs/inode.c:950 iget_locked+0xb1/0x830 fs/inode.c:1273 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296 evict+0x2a4/0x620 fs/inode.c:664 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa5406fd5ea RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970 RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432 R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004 R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000 </TASK> ================================================================== The problem is that the inode contains an xattr entry with ea_inum of 15 when cleaning up an orphan inode <15>. When evict inode <15>, the reference counting of the corresponding EA inode is decreased. When EA inode <15> is found by find_inode_fast() in __ext4_iget(), it is found that the EA inode holds the I_FREEING flag and waits for the EA inode to complete deletion. As a result, when inode <15> is being deleted, we wait for inode <15> to complete the deletion, resulting in an infinite loop and triggering Hung Task. To solve this problem, we only need to check whether the ino of EA inode and parent is the same before getting EA inode. | ||||
| CVE-2024-58072 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: remove unused check_buddy_priv Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global list of private data structures. Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") started adding the private data to that list at probe time and added a hook, check_buddy_priv to find the private data from a similar device. However, that function was never used. Besides, though there is a lock for that list, it is never used. And when the probe fails, the private data is never removed from the list. This would cause a second probe to access freed memory. Remove the unused hook, structures and members, which will prevent the potential race condition on the list and its corruption during a second probe when probe fails. | ||||
| CVE-2024-42290 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/imx-irqsteer: Handle runtime power management correctly The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ] | ||||
| CVE-2024-41067 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: handle RST lookup error correctly [BUG] When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio(): ASSERT(sector_nr < stripe->nr_sectors); Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range. [CAUSE] Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target. But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty. Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers). And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT(). [FIX] Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first. Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio(). This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter). Although the root cause of RST lookup failure still needs to be addressed. | ||||
| CVE-2022-49526 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/bitmap: don't set sb values if can't pass sanity check If bitmap area contains invalid data, kernel will crash then mdadm triggers "Segmentation fault". This is cluster-md speical bug. In non-clustered env, mdadm will handle broken metadata case. In clustered array, only kernel space handles bitmap slot info. But even this bug only happened in clustered env, current sanity check is wrong, the code should be changed. How to trigger: (faulty injection) dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm -Ss echo aaa > magic.txt == below modifying slot 2 bitmap data == dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize mdadm -A /dev/md0 /dev/sda /dev/sdb == kernel crashes. mdadm outputs "Segmentation fault" == Reason of kernel crash: In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T() trigger "divide error". Crash log: kernel: md: md0 stopped. kernel: md/raid1:md0: not clean -- starting background reconstruction kernel: md/raid1:md0: active with 2 out of 2 mirrors kernel: dlm: ... ... kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1 kernel: md0: invalid bitmap file superblock: bad magic kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2 kernel: md-cluster: Could not gather bitmaps from slot 2 kernel: divide error: 0000 [#1] SMP NOPTI kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246 kernel: ... ... kernel: Call Trace: kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0] kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a] kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0] kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a] kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a] kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a] kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a] kernel: ? blkdev_ioctl+0xb1/0x2b0 kernel: block_ioctl+0x3b/0x40 kernel: __x64_sys_ioctl+0x7f/0xb0 kernel: do_syscall_64+0x59/0x80 kernel: ? exit_to_user_mode_prepare+0x1ab/0x230 kernel: ? syscall_exit_to_user_mode+0x18/0x40 kernel: ? do_syscall_64+0x69/0x80 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f4a15fa722b kernel: ... ... kernel: ---[ end trace 8afa7612f559c868 ]--- kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] | ||||
| CVE-2023-53096 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: fix mem leak when freeing nodes The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed. | ||||
| CVE-2022-49192 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync when successful. pm_runtime_get_sync returns -error code on failure and 0 on successful resume but also 1 when the device is already active. So the common case for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls to pm_runtime_put in the call-chain so that pm_runtime_put is called one too many times and as result leaving the cpsw dev behind suspended. The suspended cpsw dev leads to an access violation later on by different parts of the cpsw driver. Fix this by calling the return-friendly pm_runtime_resume_and_get function. | ||||
| CVE-2024-38567 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline] carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline] carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> [2] Related syzkaller crashes: | ||||
| CVE-2021-47460 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] | ||||
| CVE-2024-53195 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Get rid of userspace_irqchip_in_use Improper use of userspace_irqchip_in_use led to syzbot hitting the following WARN_ON() in kvm_timer_update_irq(): WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459 kvm_timer_update_irq+0x21c/0x394 Call trace: kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459 kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968 kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264 kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline] kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline] kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695 kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 The following sequence led to the scenario: - Userspace creates a VM and a vCPU. - The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during KVM_ARM_VCPU_INIT. - Without any other setup, such as vGIC or vPMU, userspace issues KVM_RUN on the vCPU. Since the vPMU is requested, but not setup, kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change(). As a result, KVM_RUN returns after enabling the timer, but before incrementing 'userspace_irqchip_in_use': kvm_arch_vcpu_run_pid_change() ret = kvm_arm_pmu_v3_enable() if (!vcpu->arch.pmu.created) return -EINVAL; if (ret) return ret; [...] if (!irqchip_in_kernel(kvm)) static_branch_inc(&userspace_irqchip_in_use); - Userspace ignores the error and issues KVM_ARM_VCPU_INIT again. Since the timer is already enabled, control moves through the following flow, ultimately hitting the WARN_ON(): kvm_timer_vcpu_reset() if (timer->enabled) kvm_timer_update_irq() if (!userspace_irqchip()) ret = kvm_vgic_inject_irq() ret = vgic_lazy_init() if (unlikely(!vgic_initialized(kvm))) if (kvm->arch.vgic.vgic_model != KVM_DEV_TYPE_ARM_VGIC_V2) return -EBUSY; WARN_ON(ret); Theoretically, since userspace_irqchip_in_use's functionality can be simply replaced by '!irqchip_in_kernel()', get rid of the static key to avoid the mismanagement, which also helps with the syzbot issue. | ||||
| CVE-2021-47643 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: free before error exiting Fix leak in error path. | ||||
| CVE-2024-42119 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip finding free audio for unknown engine_id [WHY] ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it also means it is uninitialized and does not need free audio. [HOW] Skip and return NULL. This fixes 2 OVERRUN issues reported by Coverity. | ||||
| CVE-2022-48810 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path ip[6]mr_free_table() can only be called under RTNL lock. RTNL: assertion failed at net/core/dev.c (10367) WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Modules linked in: CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4 R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000 FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline] ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline] ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline] ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298 ops_init+0xaf/0x470 net/core/net_namespace.c:140 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178 copy_process+0x2e0c/0x7300 kernel/fork.c:2167 kernel_clone+0xe7/0xab0 kernel/fork.c:2555 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f4ab89f9059 Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f. RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038 RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059 RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000 RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300 R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000 </TASK> | ||||
| CVE-2025-37869 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence and then return. The code is waiting on m->fence which could be the local fence but this is only stable under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit 762b7e95362170b3e13a8704f38d5e47eca4ba74) | ||||
| CVE-2023-52678 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? | ||||
| CVE-2024-56583 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix warning in migrate_enable for boosted tasks When running the following command: while true; do stress-ng --cyclic 30 --timeout 30s --minimize --quiet done a warning is eventually triggered: WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794 setup_new_dl_entity+0x13e/0x180 ... Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? enqueue_dl_entity+0x631/0x6e0 ? setup_new_dl_entity+0x13e/0x180 ? __warn+0x7e/0xd0 ? report_bug+0x11a/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 enqueue_dl_entity+0x631/0x6e0 enqueue_task_dl+0x7d/0x120 __do_set_cpus_allowed+0xe3/0x280 __set_cpus_allowed_ptr_locked+0x140/0x1d0 __set_cpus_allowed_ptr+0x54/0xa0 migrate_enable+0x7e/0x150 rt_spin_unlock+0x1c/0x90 group_send_sig_info+0xf7/0x1a0 ? kill_pid_info+0x1f/0x1d0 kill_pid_info+0x78/0x1d0 kill_proc_info+0x5b/0x110 __x64_sys_kill+0x93/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f0dab31f92b This warning occurs because set_cpus_allowed dequeues and enqueues tasks with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning is triggered. A boosted task already had its parameters set by rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary, hence the WARN_ON call. Check if we are requeueing a boosted task and avoid calling setup_new_dl_entity if that's the case. | ||||
| CVE-2023-52763 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. | ||||
| CVE-2023-52925 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't fail inserts if duplicate has expired nftables selftests fail: run-tests.sh testcases/sets/0044interval_overlap_0 Expected: 0-2 . 0-3, got: W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1 Insertion must ignore duplicate but expired entries. Moreover, there is a strange asymmetry in nft_pipapo_activate: It refetches the current element, whereas the other ->activate callbacks (bitmap, hash, rhash, rbtree) use elem->priv. Same for .remove: other set implementations take elem->priv, nft_pipapo_remove fetches elem->priv, then does a relookup, remove this. I suspect this was the reason for the change that prompted the removal of the expired check in pipapo_get() in the first place, but skipping exired elements there makes no sense to me, this helper is used for normal get requests, insertions (duplicate check) and deactivate callback. In first two cases expired elements must be skipped. For ->deactivate(), this gets called for DELSETELEM, so it seems to me that expired elements should be skipped as well, i.e. delete request should fail with -ENOENT error. | ||||
| CVE-2021-47635 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix to add refcount once page is set private MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true. Otherwise, we may get a BUG in page migration: page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8 index:0xe2 pfn:0x14c12 aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e" flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0| zone=1|lastcpupid=0x1fffff) page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0) ------------[ cut here ]------------ kernel BUG at include/linux/page_ref.h:184! invalid opcode: 0000 [#1] SMP CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5 RIP: 0010:migrate_page_move_mapping+0xac3/0xe70 Call Trace: ubifs_migrate_page+0x22/0xc0 [ubifs] move_to_new_page+0xb4/0x600 migrate_pages+0x1523/0x1cc0 compact_zone+0x8c5/0x14b0 kcompactd+0x2bc/0x560 kthread+0x18c/0x1e0 ret_from_fork+0x1f/0x30 Before the time, we should make clean a concept, what does refcount means in page gotten from grab_cache_page_write_begin(). There are 2 situations: Situation 1: refcount is 3, page is created by __page_cache_alloc. TYPE_A - the write process is using this page TYPE_B - page is assigned to one certain mapping by calling __add_to_page_cache_locked() TYPE_C - page is added into pagevec list corresponding current cpu by calling lru_cache_add() Situation 2: refcount is 2, page is gotten from the mapping's tree TYPE_B - page has been assigned to one certain mapping TYPE_A - the write process is using this page (by calling page_cache_get_speculative()) Filesystem releases one refcount by calling put_page() in xxx_write_end(), the released refcount corresponds to TYPE_A (write task is using it). If there are any processes using a page, page migration process will skip the page by judging whether expected_page_refs() equals to page refcount. The BUG is caused by following process: PA(cpu 0) kcompactd(cpu 1) compact_zone ubifs_write_begin page_a = grab_cache_page_write_begin add_to_page_cache_lru lru_cache_add pagevec_add // put page into cpu 0's pagevec (refcnf = 3, for page creation process) ubifs_write_end SetPagePrivate(page_a) // doesn't increase page count ! unlock_page(page_a) put_page(page_a) // refcnt = 2 [...] PB(cpu 0) filemap_read filemap_get_pages add_to_page_cache_lru lru_cache_add __pagevec_lru_add // traverse all pages in cpu 0's pagevec __pagevec_lru_add_fn SetPageLRU(page_a) isolate_migratepages isolate_migratepages_block get_page_unless_zero(page_a) // refcnt = 3 list_add(page_a, from_list) migrate_pages(from_list) __unmap_and_move move_to_new_page ubifs_migrate_page(page_a) migrate_page_move_mapping expected_page_refs get 3 (migration[1] + mapping[1] + private[1]) release_pages put_page_testzero(page_a) // refcnt = 3 page_ref_freeze // refcnt = 0 page_ref_dec_and_test(0 - 1 = -1) page_ref_unfreeze VM_BUG_ON_PAGE(-1 != 0, page) UBIFS doesn't increase the page refcount after setting private flag, which leads to page migration task believes the page is not used by any other processes, so the page is migrated. This causes concurrent accessing on page refcount between put_page() called by other process(eg. read process calls lru_cache_add) and page_ref_unfreeze() called by mi ---truncated--- | ||||
| CVE-2024-57991 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles() During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process which will re-order the list if an entry with target pattern is found. And once one is found, should have aborted the list_for_each_entry. But, `break` just aborted the inner for-loop. The outer list_for_each_entry still continues. Normally, only the first entry will match the target pattern, and the re-ordering will change nothing, so there won't be soft lockup. However, in some special cases, soft lockup would happen. Fix it by `goto fill` to break from the list_for_each_entry. The following is a sample of kernel log for this problem. watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055] [...] RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core [...] | ||||